BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.0027634BTC
มีสินค้า
Supermicro
Supermicro AOC-TSR-FS 1G/10G Dual-rate SFP+ Transceiver
A dual-rate SFP+ transceiver supporting 1G and 10G short-range connections
- CPU TypeDua l / Single Intel Xeon
- Dual-rate 1G/10G SFP+ transceiver for flexible network speeds
- range design suited to rack-to-rack links
- Supermicro FTLX8571D3BCV module validated for Supermicro server motherboards
- Hot-pluggable SFP+ form factor simplifies deployment
- Supports 10 Gbps and 1 Gbps Ethernet rates
Supermicro 1G/10G SFP+ Transceiver
This Supermicro AOC-TSR-FS module provides a dual-rate SFP+ transceiver for 1 GbE and 10 GbE links. It is built for short-range connections over multimode fibre in server and storage environments. The part carries the manufacturer MPN FTLX8571D3BCV. It suits administrators adding fibre uplinks to compatible Supermicro systems.
Fits short-range multimode deployments
The transceiver targets networks running 1 GbE or 10 GbE over short-reach multimode fibre. It is not intended for single-mode fibre or long-haul links. Buyers needing extended distances or different wavelengths should evaluate alternative modules. Compatibility depends on the host platform SFP+ cage and firmware support.
Dual-rate 1G/10G SFP+ interface
The single specification that decides fit is the dual-rate SFP+ interface supporting both 1 GbE and 10 GbE operation. Verify that the target switch or adapter accepts this form factor and rate combination. The MPN FTLX8571D3BCV identifies the exact transceiver variant for ordering and validation.
จุดเด่น
- Dual-rate 1G/10G SFP+ transceiver for flexible network speeds
- range design suited to rack-to-rack links
- Supermicro FTLX8571D3BCV module validated for Supermicro server motherboards
- Hot-pluggable SFP+ form factor simplifies deployment
- Supports 10 Gbps and 1 Gbps Ethernet rates
ข้อมูลจำเพาะ
| CPU Type | Dua l / Single Intel Xeon |
|---|
คำถามเกี่ยวกับสินค้านี้
What link speed does the SFP+ transceiver support?
The module operates at 1G or 10G dual-rate, auto-negotiating to the link partner's capability.
Which slot type accepts this transceiver on the motherboard?
It plugs into a standard SFP+ cage on the board; the latch clips into the cage's retention notch.
How is the transceiver seated correctly during installation?
Remove the dust cap, align the key, push firmly until the latch clicks, then attach the fibre patch cord.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
