暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small rectangular transceiver module with metallic finish and side label

Supermicro

Supermicro AOC-TSR-FS 1G/10G Dual-rate SFP+ Transceiver

SKU CH-AKF0-XMVNA

A dual-rate SFP+ transceiver supporting 1G and 10G short-range connections

  • CPU TypeDua l / Single Intel Xeon
  • Dual-rate 1G/10G SFP+ transceiver for flexible network speeds
  • range design suited to rack-to-rack links
  • Supermicro FTLX8571D3BCV module validated for Supermicro server motherboards
  • Hot-pluggable SFP+ form factor simplifies deployment
  • Supports 10 Gbps and 1 Gbps Ethernet rates

Supermicro 1G/10G SFP+ Transceiver

This Supermicro AOC-TSR-FS module provides a dual-rate SFP+ transceiver for 1 GbE and 10 GbE links. It is built for short-range connections over multimode fibre in server and storage environments. The part carries the manufacturer MPN FTLX8571D3BCV. It suits administrators adding fibre uplinks to compatible Supermicro systems.

Fits short-range multimode deployments

The transceiver targets networks running 1 GbE or 10 GbE over short-reach multimode fibre. It is not intended for single-mode fibre or long-haul links. Buyers needing extended distances or different wavelengths should evaluate alternative modules. Compatibility depends on the host platform SFP+ cage and firmware support.

Dual-rate 1G/10G SFP+ interface

The single specification that decides fit is the dual-rate SFP+ interface supporting both 1 GbE and 10 GbE operation. Verify that the target switch or adapter accepts this form factor and rate combination. The MPN FTLX8571D3BCV identifies the exact transceiver variant for ordering and validation.

特長

  • Dual-rate 1G/10G SFP+ transceiver for flexible network speeds
  • range design suited to rack-to-rack links
  • Supermicro FTLX8571D3BCV module validated for Supermicro server motherboards
  • Hot-pluggable SFP+ form factor simplifies deployment
  • Supports 10 Gbps and 1 Gbps Ethernet rates

仕様

CPU TypeDua l / Single Intel Xeon

この商品に関する質問

What link speed does the SFP+ transceiver support?

The module operates at 1G or 10G dual-rate, auto-negotiating to the link partner's capability.

Which slot type accepts this transceiver on the motherboard?

It plugs into a standard SFP+ cage on the board; the latch clips into the cage's retention notch.

How is the transceiver seated correctly during installation?

Remove the dust cap, align the key, push firmly until the latch clicks, then attach the fibre patch cord.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。