TAGAN
TAGAN TG-530-U15 530W Modular ATX Power Supply
A 530W modular ATX power supply with dual 12V rails, SLI certification and a 120mm fan rated at 22dBA under 60% load
- TypeATX12V Version 2.01
- Maximum Power530Watts
- Fans1 x 120mm Fan
- PFCNo
- Main Connector20+4Pin
- +12V Rails2
- Modular design lets you connect only the cables your build needs
- Dual 12V rails deliver stable power to CPU and graphics cards
- 120mm fan with Silent Control runs at 22dBA under 60% load
- SLI Certified and CrossFire Ready for multi-GPU configurations
- Safety approvals include CB, CE, CSA, FCC, TUV and UL
530W Modular ATX Power Supply
The TAGAN TG-530-U15 delivers 530 watts through a modular ATX12V 2.01 design. Two +12V rails supply 20 amps each while +3.3V and +5V rails provide 26 and 30 amps. A 120 mm fan runs under Tagan Silent Control Technology at 22 dBA under 60 percent load. The black metal chassis includes an EMI core and a special grounding wire.
Upgrade from non-modular or lower-wattage units
Builders replacing a fixed-cable supply gain cable management flexibility and SLI or CrossFire readiness. The 12V combine and split switch lets you match rail configuration to the graphics setup. The jump is worth it when a system needs dual PCI-E power and cleaner routing without exceeding the 530 watt ceiling.
Dual-GPU headroom and peripheral capacity
Two PCI-E connectors and four SATA ports handle twin graphics cards and multiple drives. Six peripheral and two floppy connectors cover legacy devices. The 530 watt limit means the unit runs out with power-hungry cards or heavy overclocks. Buyers who want more storage connectors or higher 12V current must look elsewhere.
จุดเด่น
- Modular design lets you connect only the cables your build needs
- Dual 12V rails deliver stable power to CPU and graphics cards
- 120mm fan with Silent Control runs at 22dBA under 60% load
- SLI Certified and CrossFire Ready for multi-GPU configurations
- Safety approvals include CB, CE, CSA, FCC, TUV and UL
ข้อมูลจำเพาะ
| Brand | Tagan |
|---|---|
| Model | TG-530-U15 |
| Type | ATX12V Version 2.01 |
| Maximum Power | 530Watts |
| Fans | 1 x 120mm Fan |
| PFC | No |
| Main Connector | 20+4Pin |
| +12V Rails | 2 |
| SLI | SLI Certified |
| CrossFire | CrossFire Ready |
| Modular | Modular |
| Over Voltage Protection | Yes |
| Input Voltage | 115 / 230 V |
| Input Frequency Range | 50/60 Hz |
| Input Current | 10A @ 115V, 6A @ 230V |
| Output | +3.3@26A,+5V@30A,+12V1@20A,+12V2@20A,-12V@1A, [email protected] , [email protected] , |
| Approvals | CB, CE, CSA, FCC, TUV, UL |
| Connectors | 1 x Main connector (20+4 pin) 1 x 12V (P4) 1 x 12V (8 pin) 6 x peripheral 4x SATA 2 x Floppy 2 x PCI-E |
| Features | Black Metal Chassis 12V combine & split switch Tagan Silent Control Technology (TSCT) 22dBA at 60%% load EMI core for reducing the radiation & ripple noise for new “high-end” graphic cards Special Grounding Wire |
| น้ำหนักในการจัดส่ง | 3.63 kg |
| ขนาดบรรจุภัณฑ์ | 152 × 152 × 102 mm |
คำถามเกี่ยวกับสินค้านี้
What case clearance does the 120mm fan and black metal chassis need?
The unit follows the standard ATX form factor so it fits any case designed for ATX12V 2.01 supplies; allow a few centimetres behind the rear panel for the modular cable plugs and the 12V combine and split switch.
Which cables must stay attached during installation and which can be left in the box?
The 20+4 pin main connector, one 12V P4 and one 12V 8 pin are fixed; all six peripheral, four SATA, two floppy and two PCI-E leads are modular and only need connecting if your build uses them.
When should the 120mm fan be cleaned or the unit replaced?
Clean the fan intake with compressed air once a year to keep the TSCT noise level near 22dBA at 60 percent load; replace the supply if voltages drift outside ATX tolerance or the over voltage protection trips repeatedly.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



