เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน

สินค้าที่ติดตาม เข้าสู่ระบบ

Thermal Grizzly

Thermal Grizzly TG-GG-100-100-08 GPU Guard Gasket 100x100x0.8 mm

SKU CH-KVNW-TF9AM

A highly compressible foam gasket that protects GPU dies and nearby components when using liquid metal, bridging height differences from 0.8 mm down to 0.15 mm and resisting gallium degradation

  • FeaturesHighly compressible foam gasket for GPUs, designed to protec
  • Protects GPU die and SMDs from liquid metal shorts using compressible foam
  • Compresses from 0.8 mm to 0.15 mm bridging die and heatsink height gaps
  • Gallium-resistant foam extends liquid metal lifespan by blocking oxygen
  • 100 × 100 mm pad cuts cleanly to fit multiple GPU sizes
  • Simple scalpel trimming with guides prevents conductive paste migration onto PCB

GPU die protection gasket

The Thermal Grizzly TG GPU Guard is a compressible foam gasket designed to shield GPU dies and adjacent surface-mounted components when using electrically conductive thermal interface materials such as liquid metal. It prevents short circuits and extends the lifespan of the liquid metal by limiting oxygen exposure. Builders applying liquid metal to graphics cards will find this essential for safe installation.

Simple cut-to-fit installation

The universal 100 × 100 mm pad is trimmed with a scalpel to match the specific GPU die layout, and instructions guide the measuring and cutting process. The foam compresses from 0.8 mm down to 0.15 mm under cooler mounting pressure, automatically bridging height differences between the die and surrounding components. The gasket is not reusable and must be replaced if the cooler is removed, and it is explicitly not intended for CPU applications.

Covers multiple GPU sizes

A single 100 × 100 mm sheet provides enough material for several installations across different graphics card models. The foam's gallium-resistant composition ensures it does not degrade during long-term contact with liquid metal. Users requiring a pre-cut shape for a specific card or those installing on CPUs will need a different solution.

จุดเด่น

  • Protects GPU die and SMDs from liquid metal shorts using compressible foam
  • Compresses from 0.8 mm to 0.15 mm bridging die and heatsink height gaps
  • Gallium-resistant foam extends liquid metal lifespan by blocking oxygen
  • 100 × 100 mm pad cuts cleanly to fit multiple GPU sizes
  • Simple scalpel trimming with guides prevents conductive paste migration onto PCB

ข้อมูลจำเพาะ

BrandThermal Grizzly
ModelTG-GG-100-100-08
Part NumberTG-GG-100-100-08
FeaturesHighly compressible foam gasket for GPUs, designed to protect electronic components when using liquid metal or other electrically conductive thermal interface materials, while at the same time increasing the lifespan of liquid metal.

คำถามเกี่ยวกับสินค้านี้

How do I verify the gasket has compressed correctly after installing the cooler?

The 0.8 mm foam compresses to 0.15 mm under mounting pressure, fully bridging the height gap between the GPU die, SMDs and heatsink so liquid metal cannot spread onto the PCB.

What comes in the package and do I need any extra tools to fit it?

One 100 × 100 mm universal pad is supplied; you must cut it to shape yourself using a scalpel or sharp knife following the included measuring and cutting instructions.

Which version should I choose for my graphics card?

Only the universal 100 × 100 × 0.8 mm variant is offered; trim it to match your specific GPU die and surrounding SMD layout.

อื่น ๆ ในหมวดนี้

ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้

หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที