저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Square grey foam gasket 100 by 100 mm 0.8 mm thick

Thermal Grizzly

Thermal Grizzly TG-GG-100-100-08 GPU Guard Gasket 100x100x0.8 mm

SKU CH-KVNW-TF9AM

A highly compressible foam gasket that protects GPU dies and nearby components when using liquid metal, bridging height differences from 0.8 mm down to 0.15 mm and resisting gallium degradation

  • FeaturesHighly compressible foam gasket for GPUs, designed to protec
  • Protects GPU die and SMDs from liquid metal shorts using compressible foam
  • Compresses from 0.8 mm to 0.15 mm bridging die and heatsink height gaps
  • Gallium-resistant foam extends liquid metal lifespan by blocking oxygen
  • 100 × 100 mm pad cuts cleanly to fit multiple GPU sizes
  • Simple scalpel trimming with guides prevents conductive paste migration onto PCB

GPU die protection gasket

The Thermal Grizzly TG GPU Guard is a compressible foam gasket designed to shield GPU dies and adjacent surface-mounted components when using electrically conductive thermal interface materials such as liquid metal. It prevents short circuits and extends the lifespan of the liquid metal by limiting oxygen exposure. Builders applying liquid metal to graphics cards will find this essential for safe installation.

Simple cut-to-fit installation

The universal 100 × 100 mm pad is trimmed with a scalpel to match the specific GPU die layout, and instructions guide the measuring and cutting process. The foam compresses from 0.8 mm down to 0.15 mm under cooler mounting pressure, automatically bridging height differences between the die and surrounding components. The gasket is not reusable and must be replaced if the cooler is removed, and it is explicitly not intended for CPU applications.

Covers multiple GPU sizes

A single 100 × 100 mm sheet provides enough material for several installations across different graphics card models. The foam's gallium-resistant composition ensures it does not degrade during long-term contact with liquid metal. Users requiring a pre-cut shape for a specific card or those installing on CPUs will need a different solution.

주요 특징

  • Protects GPU die and SMDs from liquid metal shorts using compressible foam
  • Compresses from 0.8 mm to 0.15 mm bridging die and heatsink height gaps
  • Gallium-resistant foam extends liquid metal lifespan by blocking oxygen
  • 100 × 100 mm pad cuts cleanly to fit multiple GPU sizes
  • Simple scalpel trimming with guides prevents conductive paste migration onto PCB

사양

BrandThermal Grizzly
ModelTG-GG-100-100-08
Part NumberTG-GG-100-100-08
FeaturesHighly compressible foam gasket for GPUs, designed to protect electronic components when using liquid metal or other electrically conductive thermal interface materials, while at the same time increasing the lifespan of liquid metal.

이 상품에 대한 질문

How do I verify the gasket has compressed correctly after installing the cooler?

The 0.8 mm foam compresses to 0.15 mm under mounting pressure, fully bridging the height gap between the GPU die, SMDs and heatsink so liquid metal cannot spread onto the PCB.

What comes in the package and do I need any extra tools to fit it?

One 100 × 100 mm universal pad is supplied; you must cut it to shape yourself using a scalpel or sharp knife following the included measuring and cutting instructions.

Which version should I choose for my graphics card?

Only the universal 100 × 100 × 0.8 mm variant is offered; trim it to match your specific GPU die and surrounding SMD layout.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.