Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Black metal bracket holding two 2.5 inch drives in a 3.5 inch bay

STARTECH

STARTECH BRACKET225PT Dual 2.5" to 3.5" HDD/SSD Mounting Bracket

SKU CH-J9EF-0EP5Z MPN BRACKET225PT

Mounts two 2.5 inch SATA drives in one 3.5 inch bay with tool-free installation

  • ColorBlack
  • Conversion Tray2 x 2.5" Drive to 3.5" Bay
  • Mobile Rack Drives SupportMulti 2.5" Drives to 3.5" Bay
  • Mobile Rack InterfaceSATA I/II/III
  • Protection CaseMultiple Drives
  • Compatible Products2.5"

Model 2 x 2.5in (Tool-less)

Üzeri çizili sürümler mevcuttur ancak burada stokta değildir.

Option 1 x 3.5in

  • Install two drives in one 3.5" bay
  • Tool-free bracket installs without extra hardware
  • Fits 2.5" drives from 5 mm to 12.5 mm thick
  • Works with SATA I, II and III drives
  • Black metal frame protects both drives inside the bay

Dual 2.5″ to 3.5″ drive bracket

The StarTech BRACKET225PT adapter fits two 2.5″ SATA solid-state drives or hard drives into a single 3.5″ bay. It accepts drives from 5 mm to 12.5 mm thick and uses a tool-free design for quick installation. The bracket is intended for desktop builders who need extra storage without sacrificing an additional bay.

SATA I/II/III interface limits

Data transfer speed is bound by the SATA revision supported by the drive and the host controller. The bracket itself adds no protocol overhead but cannot exceed the bandwidth of the slowest link in the chain. Builders using older SATA I ports will see reduced throughput compared with SATA III connections.

Check bay clearance and drive height

Verify that the chassis has a free 3.5″ bay with enough depth for the bracket and both drives. Confirm each 2.5″ drive measures between 5 mm and 12.5 mm in height; thicker drives will not fit. Ensure the motherboard or controller provides two SATA data ports and the power supply has two SATA power connectors.

Öne çıkanlar

  • Install two drives in one 3.5" bay
  • Tool-free bracket installs without extra hardware
  • Fits 2.5" drives from 5 mm to 12.5 mm thick
  • Works with SATA I, II and III drives
  • Black metal frame protects both drives inside the bay

Teknik özellikler

BrandStarTech.com
ModelBRACKET225PT
ColorBlack
Conversion Tray2 x 2.5" Drive to 3.5" Bay
Mobile Rack Drives SupportMulti 2.5" Drives to 3.5" Bay
Mobile Rack InterfaceSATA I/II/III
Protection CaseMultiple Drives
Compatible Products2.5"
SpecificationsCompatible Drive Types (Type and Rate): SATA & IDE
Drive Installation: Fixed
Drive Size: 2.5in
Number of 2.5 inch bays 2
Supported Drive Height(s):
5mm
7mm
9.5mm
12.5mm
FeaturesInstall two 2.5” solid-state drives or hard drives into a single 3.5” bay in a desktop computer
Tool-free 2-drive adapter bracket
2-bay 2.5" to 3.5" SATA SSD/HDD Converter Adapter
Supports 2.5in drives 5mm to 12.5 mm in height
SATA I/II/III
Kargo ağırlığı0.09 kg
Koli boyutu142 × 107 × 36 mm

Bu modelin diğer sürümleri

Aynı seriden 3 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

Should I pick the single or dual version of this bracket?

The BRACKET225PT is the dual version and holds two 2.5in drives in one 3.5in bay.

What does the tool-less design mean when I fit it in my PC?

You can slide each 2.5in drive into the bracket and secure it without screws, then mount the bracket in the 3.5in bay.

The bracket lists SATA I/II/III — what speed will my drives actually run at?

The bracket passes through the native SATA link so each drive runs at its own rated SATA I, II or III speed.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.