darkFlash V92 9.2" IPS Secondary Display White
- PC Secondary Display
- No
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
52Pi
An 11.26-inch portable IPS monitor with 1920x440 resolution, 10-point capacitive touch, HDMI input, 350 cd/m² brightness and 178° viewing angles
The 52Pi 11.26-inch portable monitor delivers a 1920x440 resolution on an IPS panel with 178-degree viewing angles. Capacitive 10-point multi-touch supports precise gesture control. HDMI connectivity allows use with Raspberry Pi 5, 4B, 3B+ and 3B boards as well as other HDMI sources. Brightness reaches 350 cd/m2 with a 600:1 contrast ratio.
Mounting holes on the rear accept a Raspberry Pi board directly for a compact stack. HDMI carries both video and touch data so only one cable is required for most hosts. The 30ms response time and 60 Hz refresh rate suit desktop and media use but not fast gaming. Touch calibration may be needed on first boot depending on the operating system.
Verify that your source device provides a standard HDMI output and can drive a 1920x440 resolution at 60 Hz. Ensure the board or computer supplies enough USB power for the touch controller if a separate USB link is required. Confirm that the 11.26-inch form factor fits your intended enclosure or mounting location. Buyers needing a taller aspect ratio or higher refresh rate should consider other models.
| Brand | 52Pi |
|---|---|
| Model | 52Pi 11.26 Inch Capacitive Touch Screen |
| Part Number | EP-0189 |
| Monitor Type | Portable Monitor |
| Touchscreen Type | Capacitive 10-point multi-touch |
| Panel | IPS |
| Screen Size | 11.26“ |
| Display Type | HD |
| Viewing Angle | 178° (H) / 178° (V) |
| Display Colors | 16.7 Million |
| Aspect Ratio | 16:9 |
| Brightness | 350 cd/m2 |
| Contrast Ratio | 600:1 |
| Response Time | 30ms |
| Horizontal Refresh Rate | 60 Hz |
| HDMI | Yes |
| 3D Glasses Included | No |
The panel should show a 1920x440 image at 60 Hz with 350 cd/m² brightness and 178° viewing angles; touch response must register up to 10 simultaneous points across the capacitive surface.
The monitor includes an HDMI interface for video and touch data; a separate HDMI cable, a 5 V power supply for the display, and a Raspberry Pi board (5, 4B, 3B+ or 3B) are not included and must be purchased separately.
The single 11.26" model with 1920x440 resolution, IPS panel, 10-point capacitive touch and mounting holes for Pi boards is the only version listed; select it when you need that exact screen size and touch capability.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟