OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
128 GB DDR4-2933 ECC registered quad-rank RDIMM for Supermicro servers
This 128GB registered DDR4 module runs at 2933MHz with CL21 latency and 1.20V operation. It uses a 4Rx4 quad-rank layout built on Samsung 3DS/TSV chips and carries Supermicro certification for validated server platforms.
Registered ECC RDIMMs require a chipset and CPU that support registered signalling and error correction; consumer desktop boards will not POST with them. The 4Rx4 quad-rank organisation increases electrical load per slot, so the maximum number of modules per channel is often lower than with single or dual-rank DIMMs.
Confirm that your motherboard or server qualified vendor list includes the MEM-DR412MH-ER29 part number and supports 128GB quad-rank RDIMMs at 2933MHz. Check the maximum supported capacity per slot and total system capacity, as some platforms cap registered DIMM density below 128GB. Ensure the BIOS revision in use recognises Samsung 3DS/TSV modules.
| Brand | SuperMicro |
|---|---|
| Series | Supermicro Certified |
| Model | MEM-DR412MH-ER29 |
| Capacity | 128GB |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2S2Rx4 (4Rx4) |
| Chipset | Samsung Chipset |
| Features | Supermicro Certified MEM-DR412MH-ER29 (M393AAG40M3B-CYF) |
This module provides 128GB in a single 288-pin RDIMM using 3DS/TSV technology with a 2S2Rx4 (4Rx4) organisation. Select it when your server board supports quad-rank registered DIMMs and you need maximum density per slot.
The module runs at DDR4 2933 (PC4-23400) with CL21 latency at 1.20V, giving 23400 MB/s peak bandwidth per stick when the platform enables that data rate.
The registered ECC interface adds one clock cycle of buffering for signal integrity, allowing dense 4Rx4 loads on 288-pin DDR4 server boards while maintaining the 2933 MHz specification.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟