نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Two green DDR3 ECC registered DIMMs with gold contacts and black chips

A-Tech

A-Tech 16GB (2x8GB) DDR3 1066 ECC RDIMM 4Rx8 1.5V 240-Pin Server RAM

SKU CH-DT8E-VZVG8

A 16 GB dual-channel DDR3-1066 ECC registered kit with quad-rank modules for servers and workstations

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 16GB (2 x 8GB)

Speed DDR3 1066 (PC3 8500)

  • 16 GB dual-channel kit doubles server memory capacity
  • DDR3 1066 MHz speed accelerates data throughput
  • ECC registered design detects and corrects memory errors
  • Quad-rank 4Rx8 organisation maximises density per module
  • 5 V standard voltage ensures broad DDR3 server compatibility

A-Tech 16GB DDR3 Server Memory Kit

This 16GB kit contains two 8GB DDR3 registered DIMMs designed for compatible servers and workstations. Each module runs at 1066 MHz with CL7 latency at the standard 1.5V voltage. The dual-channel configuration uses 4Rx8 quad-rank organisation and includes ECC error correction for data integrity.

Suitable for DDR3 registered memory platforms only

These modules are built for systems that specifically require DDR3 ECC RDIMM technology and will not fit or function in desktop or laptop computers. Buyers who need unbuffered memory, a different DDR generation, or higher-speed modules should look at other options that match their platform requirements.

16GB capacity for multi-tasking workloads

The 16GB total capacity provides headroom for running multiple applications and virtual machines on supported hardware. Systems limited to lower memory ceilings or those requiring faster DDR3 speeds will reach the limits of this kit sooner than platforms that can fully utilise the registered dual-channel design.

أبرز المميزات

  • 16 GB dual-channel kit doubles server memory capacity
  • DDR3 1066 MHz speed accelerates data throughput
  • ECC registered design detects and corrects memory errors
  • Quad-rank 4Rx8 organisation maximises density per module
  • 5 V standard voltage ensures broad DDR3 server compatibility

المواصفات

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 8GB 4Rx8 PC3-8500R
Capacity16GB (2 x 8GB)
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx8
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

My server only has standard DDR3 DIMM slots — will these 240-pin registered modules fit and be recognised?

These are 240-pin DDR3 RDIMMs; they require a server or workstation motherboard that explicitly supports registered ECC memory, not a standard desktop board.

I plan to keep my existing PC3-8500R sticks — can I mix them with this 4Rx8 kit without stability issues?

Mixing ranks is not recommended; this kit uses quad-rank 4Rx8 modules, so the motherboard must support that rank density and all slots should ideally be populated with identical modules.

After installation, how can I confirm the kit is running at the rated 1066 MHz with ECC active?

Enter the BIOS or use a tool such as CPU-Z to verify the memory frequency shows 1066 MHz and that ECC status reports as enabled for each module.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.