A-Tech 32GB (4x8GB) DDR3L 1600 ECC RDIMM 1.35V 2Rx8 Server RAM
- 32GB (4 x 8GB)
- DDR3L 1600 (PC3L 12…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
ECC-registered dual-channel kit adds 16 GB of DDR4 2400 memory with CL17 latency at 1.2 V for servers and workstations
Capacity 16GB (2 x 8GB)
This 16 GB kit contains two 8 GB DDR4 2400 registered DIMMs with ECC and a CAS latency of CL17 at 1.2 V. It is built for servers and workstations that require registered memory and will not function in standard desktop or laptop platforms. The dual-channel configuration helps improve throughput for multi-threaded workloads.
Replacing unbuffered or lower-speed memory with these registered ECC DIMMs adds error correction and signal integrity for mission-critical tasks. The jump is worthwhile when your platform supports registered memory and you need data integrity for virtualisation, databases or compute clusters.
Buyers who need registered DDR4 ECC memory for a compatible 288-pin platform will benefit from the validated dual-channel kit. Those whose systems require unbuffered DIMMs, laptop SO-DIMMs, or a different DDR generation should look at other memory types.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Server Memory RAM |
| Model | A-Tech 8GB 1Rx8 PC4-2400T-R |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The modules use the standard DDR4 DIMM form factor with 288 pins and must be installed in registered DIMM slots that support ECC RDIMM memory.
Consult the server or workstation manual for the correct slot sequence; the kit is a dual-channel pair of single-rank 1Rx8 modules that must be seated in the designated channels to run at 2400 MHz CL17.
No firmware updates are required for the memory itself; stability is maintained by the motherboard memory controller, and the 1.2 V modules only need re-seating if the system is moved or shows memory errors.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟