EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
16 GB DDR4 2666 CL19 desktop DIMM built as a compatible replacement for HP 934255-800
This module is a 16GB DDR4 2666 DIMM rated at CL19 and 1.2V. It uses an unbuffered non-ECC design with a major-brand chipset and no heat spreader. The 288-pin form factor fits standard desktop memory slots. It is built as a compatible replacement for HP part 934255-800.
Buyers with desktops that accept DDR4 2666 unbuffered DIMMs and need a single 16GB module will find this a direct match. Systems that require ECC, registered memory, lower latency than CL19, or a different voltage should look at other modules. Always verify the motherboard manual for supported densities and speeds before ordering.
The module operates at the standard 1.2V DDR4 voltage with CL19 timings, so sustained workloads run within the JEDEC envelope without extra cooling. Unbuffered topology keeps signal paths short for consistent latency during long sessions. No heat spreader means the chips rely on case airflow, which is typical for this density and speed class.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for HP |
| Model | 934255-800 |
| Capacity | 16GB |
| Speed | DDR4 2666 (PC4 21300) |
| Tested Frequency | 2666 |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | 934255-800 |
| Recommend Use | Compatible Replacement for HP 934255-800 |
It fits a standard desktop DDR4 DIMM socket with 288 pins; the board must support DDR4 memory at 1.2V.
The module runs at CL19; if other installed DDR4 modules have different timings the system will use the slowest common settings across all slots.
Check the memory frequency in BIOS or a system-information tool such as CPU-Z; it should report 2666 MT/s (PC4-21300) for the new module.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟