暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green printed circuit board with black memory chips on both sides, gold edge connector, no heat spreader

A-Tech

A-Tech 16GB DDR4 2666 CL19 desktop RAM 934255-800

SKU CH-YRAT-D3P98

16 GB DDR4 2666 CL19 desktop DIMM built as a compatible replacement for HP 934255-800

  • Capacity16GB
  • SpeedDDR4 2666 (PC4 21300)
  • Tested Frequency2666
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCNo
  • 16 GB capacity handles heavier workloads
  • DDR4 2666 MHz speed accelerates data transfer
  • CL19 latency keeps response times tight
  • 20 V operation matches standard DDR4 voltage
  • 288-pin DIMM fits compatible desktop slots

A-Tech 16GB DDR4 2666 CL19 Desktop Memory

This module is a 16GB DDR4 2666 DIMM rated at CL19 and 1.2V. It uses an unbuffered non-ECC design with a major-brand chipset and no heat spreader. The 288-pin form factor fits standard desktop memory slots. It is built as a compatible replacement for HP part 934255-800.

Suitable for HP systems requiring the 934255-800

Buyers with desktops that accept DDR4 2666 unbuffered DIMMs and need a single 16GB module will find this a direct match. Systems that require ECC, registered memory, lower latency than CL19, or a different voltage should look at other modules. Always verify the motherboard manual for supported densities and speeds before ordering.

Steady throughput at rated JEDEC settings

The module operates at the standard 1.2V DDR4 voltage with CL19 timings, so sustained workloads run within the JEDEC envelope without extra cooling. Unbuffered topology keeps signal paths short for consistent latency during long sessions. No heat spreader means the chips rely on case airflow, which is typical for this density and speed class.

特長

  • 16 GB capacity handles heavier workloads
  • DDR4 2666 MHz speed accelerates data transfer
  • CL19 latency keeps response times tight
  • 20 V operation matches standard DDR4 voltage
  • 288-pin DIMM fits compatible desktop slots

仕様

BrandA-Tech
SeriesCompatible Replacement for HP
Model934255-800
Capacity16GB
SpeedDDR4 2666 (PC4 21300)
Tested Frequency2666
CAS LatencyCL19
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
Features934255-800
Recommend UseCompatible Replacement for HP 934255-800

この商品に関する質問

What motherboard slot does the 288-pin DIMM require to install this 16GB module?

It fits a standard desktop DDR4 DIMM socket with 288 pins; the board must support DDR4 memory at 1.2V.

Will the CL19 timing match my existing DDR4 sticks if I keep them?

The module runs at CL19; if other installed DDR4 modules have different timings the system will use the slowest common settings across all slots.

How can I confirm the 2666 MHz speed is active after installing the 934255-800 part?

Check the memory frequency in BIOS or a system-information tool such as CPU-Z; it should report 2666 MT/s (PC4-21300) for the new module.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。