A-Tech 2GB (2x1GB) DDR2 667MHz DIMM PC2-5300 UDIMM Non-ECC 1.8V CL5 240-Pin desktop RAM
- 2GB (2 x 1GB)
- DDR2 667 (PC2 5300)
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
A 2GB dual-channel DDR2 kit running at 533MHz with CL4 latency and 1.8V operation for compatible desktop systems
Capacity 2GB (2 x 1GB)
Speed DDR2 533 (PC2 4200)
This A-Tech kit provides two gigabytes of desktop memory as a matched pair of one-gigabyte modules. The sticks are unbuffered non-ECC DIMMs that run at the standard 1.8 volts for DDR2 platforms. They are designed for straightforward installation in compatible desktop computers.
The dual-channel kit suits owners of older desktops that accept DDR2 533MHz memory and want a simple capacity increase for everyday tasks. Systems requiring error-correcting code, registered modules, or a different DDR generation will not be compatible with this kit.
The modules operate at a tested frequency of 533 megahertz, corresponding to the PC2-4200 designation. This speed rating is the single figure that determines whether the memory matches the motherboard's supported specification.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR2 Desktop Memory RAM |
| Capacity | 2GB (2 x 1GB) |
| Speed | DDR2 533 (PC2 4200) |
| Tested Frequency | 533 |
| Voltage | 1.80V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Recommend Use | AMD & Intel Compatible |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The tested frequency is 533 MHz, so the memory bus will top out at that rate before any other component becomes the bottleneck.
Each DIMM operates at the standard 1.8 V DDR2 voltage, so power draw and heat output stay at typical DDR2 levels for continuous operation.
A motherboard with DDR2 DIMM slots that accept 1.8 V unbuffered non-ECC modules and can run at PC2-4200 speeds.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟