A-Tech 16GB (4x4GB) DDR4 2133MHz CL15 1.2V 260-Pin SO-DIMM Laptop RAM Kit
- 16GB (4 x 4GB)
- 260-Pin DDR4 SO-DIMM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
A dual-channel kit of two 16 GB DDR4 DIMMs running at 2133 MHz with CL15 latency and 1.2 V operation
Capacity 32GB (2 x 16GB)
Speed DDR4 2133 (PC4 17000)
This 32 GB kit contains two 16 GB DDR4 DIMMs that run at 2133 MHz with a CL15 latency. The modules operate at the standard 1.2 V and use the 288-pin unbuffered non-ECC form factor. They are built as a dual-channel kit and are tested for compatibility with a wide range of desktop systems from major manufacturers.
Each module uses a dual-rank 2Rx8 organisation, which helps maintain steady throughput when the memory controller keeps multiple banks open during long workloads. The JEDEC-standard 1.2 V voltage keeps power draw predictable, so temperatures remain stable without requiring extra cooling. Testing at the rated 2133 MHz frequency ensures consistent performance over extended sessions.
The DIMMs follow the standard 288-pin DDR4 layout, so they seat in any desktop DDR4 slot with the usual alignment notch. Because the kit is unbuffered and non-ECC, it works in consumer motherboards that do not support registered or error-correcting memory. Verifying the motherboard’s qualified-vendor list before purchase avoids the most common compatibility issue.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Desktop Memory RAM |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 2133 (PC4 17000) |
| Tested Frequency | 2133 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Recommend Use | AMD & Intel Compatible |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The modules operate at the standard DDR4 voltage of 1.2 V, so power draw and heat output stay low during continuous use.
Your board needs DDR4 DIMM slots that accept 288-pin unbuffered non-ECC memory and support dual-channel operation.
Mixing ranks is possible but not guaranteed; the system will run at the slowest module's speed and may require manual timing adjustment.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟