OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
32 GB DDR4 2666 ECC registered DIMM with Samsung-compatible 2Rx4 chips for server workloads
This 32GB DDR4 2666 ECC RDIMM module is built for servers and workstations that require registered memory with error correction. It operates at 1.20V with a CAS latency of 19 and uses a 2Rx4 rank configuration on a 288-pin DIMM. The module serves as a direct replacement for Samsung part numbers M393A4K40BB2-CTD, M393A4K40CB2-CTD, and M393A4K40DB2-CTD.
This module fits systems that specifically support DDR4 ECC registered DIMMs at the 2666 speed grade. It will not work in desktop or laptop platforms that accept only unbuffered non-ECC memory, nor in servers requiring load-reduced or unregistered ECC modules. Buyers whose hardware demands a different voltage, pin count, or rank structure must select a different part.
The defining specification is the registered ECC design combined with a 2Rx4 rank layout, which determines compatibility with the memory controller and motherboard slot population rules. Verifying that the target system requires registered ECC RDIMMs and supports this rank configuration is the single step that confirms whether this module is the correct part.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Align the notch on the module with the slot key, press firmly until both side clips click, and ensure the registered buffer is seated before tightening the retention lever.
No scheduled maintenance is required; ECC corrects single-bit errors on the fly, and the module should only be replaced if multi-bit errors appear in system logs.
The CL19 latency at 1.20V sets the throughput ceiling; sustained bandwidth maxes out at the PC4-21300 rating before thermal throttling becomes a factor.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟