نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green rectangular circuit board with black memory chips and gold edge connector

A-Tech

A-Tech 32GB DDR4 2666 ECC UDIMM 2Rx8 CL19 1.2V 288-Pin Server RAM

SKU CH-Q2YK-2FKKB

32 GB DDR4 2666 MHz ECC UDIMM with CL19 latency and 1.2 V operation for servers and workstations

  • CAS LatencyCL19
  • Rank2Rx8
  • 32 GB capacity handles larger server workloads
  • DDR4 2666 MHz speed accelerates data throughput
  • ECC UDIMM detects and corrects memory errors
  • Dual rank 2Rx8 organisation increases memory density
  • 2 V standard voltage reduces power consumption

Server ECC UDIMM for Workstations

This 32 GB DDR4 module is built for servers and workstations that require ECC unbuffered memory. It operates at 2666 MHz with a CL19 latency and a standard 1.2 V supply. The dual-rank 2Rx8 organisation suits platforms that support registered-style density on unbuffered DIMMs.

Sustained Load Behaviour

ECC circuitry corrects single-bit errors on the fly, preventing silent data corruption during long compute jobs or virtualisation workloads. Dual-rank architecture lets the memory controller keep more banks open, helping maintain throughput when all channels are populated under continuous demand.

Compatibility Check

Verify that your system explicitly supports DDR4 ECC unbuffered UDIMMs at 2666 MHz and accepts 288-pin DIMMs with a 2Rx8 rank structure. Desktop and laptop platforms will not recognise this module, so confirm the motherboard or server manual lists this exact configuration before ordering.

أبرز المميزات

  • 32 GB capacity handles larger server workloads
  • DDR4 2666 MHz speed accelerates data throughput
  • ECC UDIMM detects and corrects memory errors
  • Dual rank 2Rx8 organisation increases memory density
  • 2 V standard voltage reduces power consumption

المواصفات

CAS LatencyCL19
Rank2Rx8

أسئلة حول هذا المنتج

How much power does the 1.2 V DDR4 2666 module draw when the server runs continuously?

The module operates at the standard DDR4 voltage of 1.2 V, keeping power draw low even under sustained 2666 MHz workloads.

What motherboard slot and memory type must my system already support for this 288-pin ECC UDIMM to work?

Your server or workstation must accept DDR4 ECC Unbuffered DIMMs in a 288-pin slot; desktop and laptop platforms are not compatible.

Will this dual-rank 2Rx8 CL19 stick run stably alongside older single-rank DDR4 2666 modules in the same channel?

Mixing ranks is possible if the platform supports it, but the memory controller will typically run all modules at the slowest common timing, here CL19 at 2666 MHz.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.