暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with black memory chips and gold edge connector

A-Tech

A-Tech 32GB DDR4 2666 ECC UDIMM 2Rx8 CL19 1.2V 288-Pin Server RAM

SKU CH-Q2YK-2FKKB

32 GB DDR4 2666 MHz ECC UDIMM with CL19 latency and 1.2 V operation for servers and workstations

  • CAS LatencyCL19
  • Rank2Rx8
  • 32 GB capacity handles larger server workloads
  • DDR4 2666 MHz speed accelerates data throughput
  • ECC UDIMM detects and corrects memory errors
  • Dual rank 2Rx8 organisation increases memory density
  • 2 V standard voltage reduces power consumption

Server ECC UDIMM for Workstations

This 32 GB DDR4 module is built for servers and workstations that require ECC unbuffered memory. It operates at 2666 MHz with a CL19 latency and a standard 1.2 V supply. The dual-rank 2Rx8 organisation suits platforms that support registered-style density on unbuffered DIMMs.

Sustained Load Behaviour

ECC circuitry corrects single-bit errors on the fly, preventing silent data corruption during long compute jobs or virtualisation workloads. Dual-rank architecture lets the memory controller keep more banks open, helping maintain throughput when all channels are populated under continuous demand.

Compatibility Check

Verify that your system explicitly supports DDR4 ECC unbuffered UDIMMs at 2666 MHz and accepts 288-pin DIMMs with a 2Rx8 rank structure. Desktop and laptop platforms will not recognise this module, so confirm the motherboard or server manual lists this exact configuration before ordering.

特長

  • 32 GB capacity handles larger server workloads
  • DDR4 2666 MHz speed accelerates data throughput
  • ECC UDIMM detects and corrects memory errors
  • Dual rank 2Rx8 organisation increases memory density
  • 2 V standard voltage reduces power consumption

仕様

CAS LatencyCL19
Rank2Rx8

この商品に関する質問

How much power does the 1.2 V DDR4 2666 module draw when the server runs continuously?

The module operates at the standard DDR4 voltage of 1.2 V, keeping power draw low even under sustained 2666 MHz workloads.

What motherboard slot and memory type must my system already support for this 288-pin ECC UDIMM to work?

Your server or workstation must accept DDR4 ECC Unbuffered DIMMs in a 288-pin slot; desktop and laptop platforms are not compatible.

Will this dual-rank 2Rx8 CL19 stick run stably alongside older single-rank DDR4 2666 modules in the same channel?

Mixing ranks is possible if the platform supports it, but the memory controller will typically run all modules at the slowest common timing, here CL19 at 2666 MHz.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。