نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

A-Tech

A-Tech 32GB DDR4 2933 DIMM 2Rx8 Desktop RAM

SKU CH-JF8C-5F686

A 32 GB DDR4 2933 DIMM module for desktop upgrades, tested at 1.2 V and 288 pins

  • Capacity32GB
  • SpeedDDR4 2933 (PC4 23400)
  • Tested Frequency2933
  • Voltage1.20V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • 32 GB capacity lets you run more applications at once
  • DDR4 2933 MHz speed matches PC4-23400 bandwidth for responsive desktop use
  • 20 V standard voltage keeps power draw low
  • 288-pin DIMM form factor fits current desktop motherboards
  • Non-ECC unbuffered design works with consumer AMD and Intel platforms

32GB DDR4 2933 DIMM for desktop upgrades

This single 32GB module runs at DDR4 2933 (PC4-23400) and fits standard 288-pin desktop slots. It targets users who need more capacity for multitasking, content work or virtual machines without populating multiple DIMM sockets.

Unbuffered non-ECC build with standard voltage

The stick uses 1.2V DDR4 standard voltage and an unbuffered non-ECC layout, so it drops into consumer AMD and Intel platforms that accept UDIMMs. The 2Rx8 organisation means the memory controller sees two ranks on one module, which can help bandwidth on dual-channel boards.

Low-voltage operation keeps thermals modest

At 1.2V the module draws little power and runs cool under normal desktop loads, so case airflow usually handles it without extra cooling. No fan or heatsink is required, leaving the DIMM silent in everyday use.

أبرز المميزات

  • 32 GB capacity lets you run more applications at once
  • DDR4 2933 MHz speed matches PC4-23400 bandwidth for responsive desktop use
  • 20 V standard voltage keeps power draw low
  • 288-pin DIMM form factor fits current desktop motherboards
  • Non-ECC unbuffered design works with consumer AMD and Intel platforms

المواصفات

BrandA-Tech
Capacity32GB
SpeedDDR4 2933 (PC4 23400)
Tested Frequency2933
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

أسئلة حول هذا المنتج

Does the DDR4 2933 module run at the standard 1.2V or does it need a higher voltage?

The module operates at 1.2V, which is the standard DDR4 voltage, so no manual voltage adjustment is required in the BIOS.

Will the 288-pin DIMM fit my motherboard's DDR4 slots?

Yes, it uses the standard 288-pin DDR4 DIMM form factor that matches every desktop DDR4 slot.

Do I need to enable XMP in the BIOS for this 2933MHz RAM to run at its rated speed?

The module is rated for 2933MHz at 1.2V; enable the appropriate memory profile in BIOS or set the frequency manually if the system defaults to a lower speed.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.