OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
4 GB DDR3 desktop module running at 1600 MHz with CL11 latency and 1.5 V operation
This is a 4 GB DDR3 desktop memory module rated at 1600 MHz with PC3-12800 bandwidth. It uses a 240-pin DIMM form factor, runs at 1.5 V, and has a CAS latency of CL11. The module is unbuffered and non-ECC, making it a standard upgrade for compatible desktop systems.
It is built as a direct replacement for the Mushkin 992002 part number and suits owners of that specific module or systems with matching DDR3 specifications. Buyers whose platforms require ECC, registered DIMMs, a different voltage, or a newer DDR generation should select a different product.
Every unit undergoes quality-assurance testing to verify dependable operation at the rated speed and timings. The validated performance means the module installs and runs at its advertised 1600 MHz CL11 settings without additional configuration.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Mushkin |
| Model | 992002 |
| Capacity | 4GB |
| Speed | DDR3 1600 (PC3 12800) |
| Tested Frequency | 1600 |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | 992002 |
| Recommend Use | Compatible Replacement for Mushkin 992002 |
Yes, the stick is a standard 240-pin DDR3 DIMM that draws its power from the slot at 1.5 V, so no auxiliary cables are needed.
The motherboard will default all populated slots to the highest common latency, so the existing CL9 kit will drop to CL11 timings when this module is added.
Exactly; a POST screen or BIOS read-out of 1600 MHz frequency and CL11 latency means the stick is running at its rated DDR3-1600 PC3-12800 specification.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟