نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green 240-pin DDR3L ECC registered DIMM with black chips

A-Tech

A-Tech 4GB DDR3L 1600 ECC RDIMM 1Rx8 1.35V Server Memory

SKU CH-H9GF-T85M3

4GB DDR3L 1600 ECC registered server DIMM with 1.35V low-voltage operation

  • Capacity4GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection safeguards data integrity with registered DDR3L 1600 CL11 operation
  • Low 1.35V DDR3L voltage reduces server power draw and heat
  • 240-pin RDIMM form factor fits standard DDR3 server memory slots
  • 4GB single-rank 1Rx8 module on Micron chipset enables straightforward capacity scaling
  • Lifetime warranty and US-based tech support back long-term deployment confidence

4GB DDR3L ECC RDIMM for servers

This 4GB DDR3L 1600 ECC registered DIMM is built for server and workstation platforms that require registered error-correcting memory. It operates at 1.35V low voltage and uses a 1Rx8 organisation with Micron chipset components.

Suits systems needing registered ECC DDR3L

It fits servers that specifically call for DDR3L 1600 registered ECC modules in a 240-pin DIMM form factor. It is not for platforms that only accept unbuffered non-ECC memory or systems that require a different DDR generation or voltage.

1.35V DDR3L voltage decides fit

The module runs at 1.35V DDR3L; a board that only supports standard 1.5V DDR3 or a newer DDR generation will not work with this part. Verify your system documentation for DDR3L registered ECC support before ordering.

أبرز المميزات

  • ECC protection safeguards data integrity with registered DDR3L 1600 CL11 operation
  • Low 1.35V DDR3L voltage reduces server power draw and heat
  • 240-pin RDIMM form factor fits standard DDR3 server memory slots
  • 4GB single-rank 1Rx8 module on Micron chipset enables straightforward capacity scaling
  • Lifetime warranty and US-based tech support back long-term deployment confidence

المواصفات

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT9KSF51272PZ-1G6E2, MT9KSF51272PZ-1G6P1
Capacity4GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMicron Chipset
FeaturesMT9KSF51272PZ-1G6E2, MT9KSF51272PZ-1G6P1

أسئلة حول هذا المنتج

What motherboard slot and pin count does this 240-pin DDR3L RDIMM require?

It installs in a standard DDR3 DIMM socket with 240 pins; the server board must accept registered ECC modules at 1.35 V.

Will this CL11 1Rx8 module run in a system that currently uses CL9 2Rx4 DDR3L RDIMMs?

Yes, the motherboard will down-clock all modules to the slowest common timing and voltage, so mixed ranks and latencies are supported.

How can I confirm the module is detected as 4 GB ECC registered at 1600 MT/s after installation?

Check the BIOS memory information screen or run dmidecode — it should show 4 GB, DDR3L, 1600 MT/s, ECC registered, 1Rx8 organisation.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.