暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 240-pin DDR3L ECC registered DIMM with black chips

A-Tech

A-Tech 4GB DDR3L 1600 ECC RDIMM 1Rx8 1.35V Server Memory

SKU CH-H9GF-T85M3

4GB DDR3L 1600 ECC registered server DIMM with 1.35V low-voltage operation

  • Capacity4GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection safeguards data integrity with registered DDR3L 1600 CL11 operation
  • Low 1.35V DDR3L voltage reduces server power draw and heat
  • 240-pin RDIMM form factor fits standard DDR3 server memory slots
  • 4GB single-rank 1Rx8 module on Micron chipset enables straightforward capacity scaling
  • Lifetime warranty and US-based tech support back long-term deployment confidence

4GB DDR3L ECC RDIMM for servers

This 4GB DDR3L 1600 ECC registered DIMM is built for server and workstation platforms that require registered error-correcting memory. It operates at 1.35V low voltage and uses a 1Rx8 organisation with Micron chipset components.

Suits systems needing registered ECC DDR3L

It fits servers that specifically call for DDR3L 1600 registered ECC modules in a 240-pin DIMM form factor. It is not for platforms that only accept unbuffered non-ECC memory or systems that require a different DDR generation or voltage.

1.35V DDR3L voltage decides fit

The module runs at 1.35V DDR3L; a board that only supports standard 1.5V DDR3 or a newer DDR generation will not work with this part. Verify your system documentation for DDR3L registered ECC support before ordering.

特長

  • ECC protection safeguards data integrity with registered DDR3L 1600 CL11 operation
  • Low 1.35V DDR3L voltage reduces server power draw and heat
  • 240-pin RDIMM form factor fits standard DDR3 server memory slots
  • 4GB single-rank 1Rx8 module on Micron chipset enables straightforward capacity scaling
  • Lifetime warranty and US-based tech support back long-term deployment confidence

仕様

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT9KSF51272PZ-1G6E2, MT9KSF51272PZ-1G6P1
Capacity4GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMicron Chipset
FeaturesMT9KSF51272PZ-1G6E2, MT9KSF51272PZ-1G6P1

この商品に関する質問

What motherboard slot and pin count does this 240-pin DDR3L RDIMM require?

It installs in a standard DDR3 DIMM socket with 240 pins; the server board must accept registered ECC modules at 1.35 V.

Will this CL11 1Rx8 module run in a system that currently uses CL9 2Rx4 DDR3L RDIMMs?

Yes, the motherboard will down-clock all modules to the slowest common timing and voltage, so mixed ranks and latencies are supported.

How can I confirm the module is detected as 4 GB ECC registered at 1600 MT/s after installation?

Check the BIOS memory information screen or run dmidecode — it should show 4 GB, DDR3L, 1600 MT/s, ECC registered, 1Rx8 organisation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。