BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
A 4 GB DDR3L 1866 MHz SODIMM module with CL13 latency and 1.35 V operation for compatible laptops
This A-Tech module is a 4GB DDR3L 1866MHz SODIMM built to replace Kingston HX318LS11IB/4, KF318LS11IB/4 and X300KG-HYA parts. It runs at 1.35V with CL13 latency and uses major-brand chips on an unbuffered, non-ECC 204-pin PCB. The stick is new and tested for laptop, notebook and all-in-one upgrades.
This suits owners of compatible AMD or Intel laptops needing a single 4GB DDR3L 1866MHz module. It is not for systems that require ECC or registered memory. It is not for machines limited to lower DDR3 speeds or different voltage requirements. Buyers wanting more than 4GB per slot should look elsewhere.
The module operates at 1.35V, the defining DDR3L low-voltage spec. If the laptop's memory slot calls for 1.5V DDR3, this stick may not be supported. Verify the system's documented voltage requirement before purchase; the 1.35V figure is the single spec that confirms compatibility.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1866 (PC3L 14900) |
| CAS Latency | CL13 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
This module operates at DDR3L 1866 MHz with a PC3L-14900 data-rate rating.
It fits a standard 204-pin DDR3 SO-DIMM slot used in compatible laptops, notebooks, and all-in-one systems.
Power off the laptop, disconnect the battery if removable, open the memory compartment, align the notch on the module with the slot key, insert at an angle, then press down firmly until the retention clips click into place.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟