BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
A-Tech
A 4 GB DDR3L 1866 MHz SODIMM module with CL13 latency and 1.35 V operation for compatible laptops
This A-Tech module is a 4GB DDR3L 1866MHz SODIMM built to replace Kingston HX318LS11IB/4, KF318LS11IB/4 and X300KG-HYA parts. It runs at 1.35V with CL13 latency and uses major-brand chips on an unbuffered, non-ECC 204-pin PCB. The stick is new and tested for laptop, notebook and all-in-one upgrades.
This suits owners of compatible AMD or Intel laptops needing a single 4GB DDR3L 1866MHz module. It is not for systems that require ECC or registered memory. It is not for machines limited to lower DDR3 speeds or different voltage requirements. Buyers wanting more than 4GB per slot should look elsewhere.
The module operates at 1.35V, the defining DDR3L low-voltage spec. If the laptop's memory slot calls for 1.5V DDR3, this stick may not be supported. Verify the system's documented voltage requirement before purchase; the 1.35V figure is the single spec that confirms compatibility.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1866 (PC3L 14900) |
| CAS Latency | CL13 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
This module operates at DDR3L 1866 MHz with a PC3L-14900 data-rate rating.
It fits a standard 204-pin DDR3 SO-DIMM slot used in compatible laptops, notebooks, and all-in-one systems.
Power off the laptop, disconnect the battery if removable, open the memory compartment, align the notch on the module with the slot key, insert at an angle, then press down firmly until the retention clips click into place.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?