OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
A 64 GB dual-channel kit of DDR4 3200 MHz ECC UDIMM modules with CL22 latency and 1.2 V operation for servers and workstations
This 64 GB kit contains two 32 GB DDR4 3200 MHz ECC UDIMM modules built for servers and workstations that require error-correcting unbuffered memory. It is not compatible with standard desktop or laptop computers. Each module uses a 288-pin DIMM form factor and operates at the standard 1.2 V DDR4 voltage. The dual-rank 2Rx8 organisation helps increase memory density for demanding workloads.
The modules run at DDR4 3200 MHz with a CAS latency of CL22, which sets the practical speed limit for this memory standard. Systems that only support lower DDR4 frequencies will downclock the kit automatically. The ECC unbuffered design adds error correction overhead but does not change the fundamental bandwidth ceiling of the DDR4 3200 interface. Mixing these modules with different speeds or ranks can further restrict achievable performance.
Installation follows the usual DIMM slot procedure: align the notch, press firmly until the retention clips click, and follow the motherboard manual for correct channel population. The most common issue is incomplete seating, which causes the system to recognise less memory or fail to boot. Because this is ECC unbuffered memory, the platform must explicitly support that type; otherwise the modules will not function even if they physically fit.
| CAS Latency | CL22 |
|---|---|
| Rank | 2Rx8 |
The kit provides 64 GB total using two 32 GB modules. Select this capacity if your workload and motherboard slot count can use the full amount; otherwise a smaller kit leaves room for future expansion.
The modules run at DDR4 3200 MHz with CL22 latency at the standard 1.2 V, delivering the rated throughput when the platform supports that speed and the memory controller is configured accordingly.
It uses the 288-pin DDR4 UDIMM form factor with ECC unbuffered signalling, so it fits standard DDR4 server and workstation slots that explicitly support ECC UDIMM; desktop or laptop boards that lack ECC support will not work.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟