OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
64 GB DDR4 2133 ECC load-reduced DIMM with CL15 latency and 1.2 V operation for server and workstation upgrades
This 64GB DDR4 module delivers ECC load-reduced reliability for server and workstation platforms. It replaces the Hynix HMAA8GL7MMR4N-TF part number with a tested equivalent built from major-brand chips. The single DIMM adds substantial capacity for virtualisation, database or compute workloads. Compatibility should be verified against the system's qualified vendor list before installation.
Standard 1.2V DDR4 voltage keeps power draw within normal limits for registered server memory. Load-reduced buffering reduces electrical load on the memory controller, helping thermal headroom in densely populated slots. No active cooling is required beyond typical server airflow. The module operates at the rated 2133MHz speed without additional voltage.
This module upgrades systems currently limited by lower-capacity or non-ECC DIMMs that cannot meet data-integrity requirements. The jump is worthwhile when workloads exceed existing memory bandwidth or capacity, causing paging or instability. It is not suited for consumer desktop boards that lack ECC LRDIMM support or for configurations requiring unbuffered UDIMMs.
| Brand | A-Tech |
|---|---|
| Capacity | 64GB |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Align the notch on the module with the slot key, press firmly until both retention clips click, and ensure the motherboard BIOS is set to the correct 1.2V voltage for DDR4 LRDIMM operation.
No scheduled maintenance is required; ECC error correction handles single-bit errors internally, and the module should only be replaced if the system reports uncorrectable memory errors or fails memory diagnostics.
The CAS latency of CL15 at 2133MHz sets the baseline access delay; under sustained load the memory controller's bandwidth ceiling is reached before thermal throttling becomes a factor at the standard 1.2V operating voltage.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟