EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
A 64GB DDR4 2933 ECC LRDIMM module with 4Rx4 organisation, CL21 latency and 1.20V operation for server memory upgrades
This 64 GB DDR4 2933 ECC LRDIMM module uses Load Reduced technology with a 4Rx4 organisation to deliver high-capacity memory for server and workstation platforms. It operates at the standard 1.20 V DDR4 voltage and carries a CL21 latency rating. The 288-pin DIMM form factor fits compatible DDR4 slots in enterprise systems.
The Load Reduced buffer reduces electrical loading on the memory bus, allowing the module to maintain signal integrity when all ranks are active during prolonged workloads. ECC circuitry detects and corrects single-bit errors throughout continuous operation. The 4Rx4 rank structure distributes access across four ranks, supporting steady throughput in multi-threaded server applications.
The DDR4 2933 (PC4-23400) interface caps peak bandwidth at the rated data rate, so sustained throughput cannot exceed this ceiling regardless of rank count. The 288-pin DIMM slot provides the physical and electrical connection defined by the DDR4 standard. System memory controllers must support ECC LRDIMM operation at 2933 MT/s to utilise the full specification.
| Brand | A-Tech |
|---|---|
| Capacity | 64GB |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module operates at standard DDR4 1.20V with Load Reduced buffering, which lowers electrical load on the memory bus and helps keep thermals manageable during continuous server workloads.
A DDR4 DIMM slot with 288 pins and a server or workstation platform that supports ECC Load Reduced DIMMs and 4Rx4 organisation is required for the module to function.
Mixing 4Rx4 Load Reduced DIMMs with different rank or buffer types on the same channel is not supported by DDR4 server memory architecture; populate identical modules per channel for stable operation.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
No language matches that.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟