OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
An 8 GB DDR3L 1600 ECC registered DIMM with 1.35 V low voltage and 2Rx8 organisation for server upgrades
This 8GB DDR3L module runs at 1600MHz with CL11 latency and 1.35V operation. It uses a 2Rx8 registered DIMM design with ECC for data integrity. The 240-pin form factor fits compatible server and workstation boards. Major brand chips provide reliable performance for demanding workloads.
This module suits administrators upgrading or repairing systems that require DDR3L registered ECC RDIMMs. It replaces specific Samsung part numbers including M393B1G73BH0-YK0 and related variants. Builders needing unbuffered UDIMMs or non-ECC memory should look at different modules. Systems limited to 1.5V DDR3 without low-voltage support cannot use this part.
The defining specification is the registered ECC RDIMM design combined with 1.35V DDR3L voltage. This combination determines compatibility with server chipsets that require registered modules and error correction. Verify your system documentation specifies DDR3L RDIMM support before purchasing. The 2Rx8 organisation and CL11 timing are secondary factors for compatibility.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Yes, the module uses the standard 240-pin DDR3 DIMM form factor and operates at 1.35 V, so it fits and runs in any server board that accepts DDR3L 1600 registered ECC memory.
It is listed as a direct replacement for that Samsung part number and shares the same 2Rx8 organisation, CL11 timing and 1.35 V voltage, so it can populate the remaining slots without changing BIOS settings.
Check the BIOS memory information or run a tool such as dmidecode or CPU-Z; they will report 1600 MT/s, registered ECC type and 1.35 V for this DIMM.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟