نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green DDR4 ECC RDIMM module 288-pin 8GB

A-Tech

A-Tech 8GB DDR4 2666 ECC RDIMM 1Rx4 Server Memory

SKU CH-D89Z-JNCTG

8GB DDR4 2666MHz ECC registered DIMM for server and workstation upgrades

  • Capacity8GB
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption with registered DDR4 architecture
  • 2666 MHz speed accelerates server workloads at PC4-21300 bandwidth
  • 8 GB capacity expands memory for demanding multi-tasking environments
  • 20 V operation reduces power draw in dense deployments
  • 1Rx4 single-rank design optimises signal integrity on 288-pin DIMM slots

A-Tech 8GB DDR4 2666 ECC RDIMM

This 8GB registered ECC module runs at DDR4 2666 (PC4-21300) with CL19 latency and 1.20V operation. It is built as a compatible replacement for Micron MTA18ASF1G72PZ-2G6B1 and MTA18ASF1G72PZ-2G6F1 server memory. The 1Rx4 organisation suits single-socket and multi-socket platforms that require registered DIMMs. System administrators upgrading compatible workstations or rack servers will find the specifications match the original Micron parts.

Thermals noise and power draw

DDR4 standard voltage of 1.20V keeps power draw low per module in typical server workloads. Registered buffering reduces electrical load on the memory controller, which helps maintain stable temperatures inside dense chassis. Passive cooling via system airflow is sufficient; no active fan or heatsink is required on the module itself. Acoustic impact is negligible because the component has no moving parts.

What the bundle changes

The package contains only the 288-pin DIMM; no additional cables, brackets or software licences are included. Compatibility is verified against the two Micron part numbers listed, so the practical change is a direct drop-in replacement when the system supports ECC RDIMM 1Rx4 modules. Buyers who need unbuffered UDIMM, LRDIMM or higher-capacity 2Rx4/4Rx4 configurations cannot use this module.

أبرز المميزات

  • ECC protection prevents data corruption with registered DDR4 architecture
  • 2666 MHz speed accelerates server workloads at PC4-21300 bandwidth
  • 8 GB capacity expands memory for demanding multi-tasking environments
  • 20 V operation reduces power draw in dense deployments
  • 1Rx4 single-rank design optimises signal integrity on 288-pin DIMM slots

المواصفات

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMTA18ASF1G72PZ-2G6B1, MTA18ASF1G72PZ-2G6F1
Capacity8GB
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMicron Chipset
FeaturesMTA18ASF1G72PZ-2G6B1, MTA18ASF1G72PZ-2G6F1

أسئلة حول هذا المنتج

How do I install this 288-pin DDR4 RDIMM and what step is commonly missed?

Align the notch on the module with the slot key, press firmly until both retention clips click; the step often missed is fully seating both ends so the clips lock automatically.

What maintenance or replacement will this 1Rx4 ECC module need over time?

No routine maintenance is required; if a correctable error count rises or the system logs uncorrectable ECC events, replace the module.

What limit appears first when this CL19 1.20V registered DIMM runs sustained workloads?

The memory controller's thermal throttle point or maximum supported capacity per channel is typically reached before the module's own timing or voltage limits.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.