暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green DDR4 ECC RDIMM module 288-pin 8GB

A-Tech

A-Tech 8GB DDR4 2666 ECC RDIMM 1Rx4 Server Memory

SKU CH-D89Z-JNCTG

8GB DDR4 2666MHz ECC registered DIMM for server and workstation upgrades

  • Capacity8GB
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption with registered DDR4 architecture
  • 2666 MHz speed accelerates server workloads at PC4-21300 bandwidth
  • 8 GB capacity expands memory for demanding multi-tasking environments
  • 20 V operation reduces power draw in dense deployments
  • 1Rx4 single-rank design optimises signal integrity on 288-pin DIMM slots

A-Tech 8GB DDR4 2666 ECC RDIMM

This 8GB registered ECC module runs at DDR4 2666 (PC4-21300) with CL19 latency and 1.20V operation. It is built as a compatible replacement for Micron MTA18ASF1G72PZ-2G6B1 and MTA18ASF1G72PZ-2G6F1 server memory. The 1Rx4 organisation suits single-socket and multi-socket platforms that require registered DIMMs. System administrators upgrading compatible workstations or rack servers will find the specifications match the original Micron parts.

Thermals noise and power draw

DDR4 standard voltage of 1.20V keeps power draw low per module in typical server workloads. Registered buffering reduces electrical load on the memory controller, which helps maintain stable temperatures inside dense chassis. Passive cooling via system airflow is sufficient; no active fan or heatsink is required on the module itself. Acoustic impact is negligible because the component has no moving parts.

What the bundle changes

The package contains only the 288-pin DIMM; no additional cables, brackets or software licences are included. Compatibility is verified against the two Micron part numbers listed, so the practical change is a direct drop-in replacement when the system supports ECC RDIMM 1Rx4 modules. Buyers who need unbuffered UDIMM, LRDIMM or higher-capacity 2Rx4/4Rx4 configurations cannot use this module.

特長

  • ECC protection prevents data corruption with registered DDR4 architecture
  • 2666 MHz speed accelerates server workloads at PC4-21300 bandwidth
  • 8 GB capacity expands memory for demanding multi-tasking environments
  • 20 V operation reduces power draw in dense deployments
  • 1Rx4 single-rank design optimises signal integrity on 288-pin DIMM slots

仕様

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMTA18ASF1G72PZ-2G6B1, MTA18ASF1G72PZ-2G6F1
Capacity8GB
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMicron Chipset
FeaturesMTA18ASF1G72PZ-2G6B1, MTA18ASF1G72PZ-2G6F1

この商品に関する質問

How do I install this 288-pin DDR4 RDIMM and what step is commonly missed?

Align the notch on the module with the slot key, press firmly until both retention clips click; the step often missed is fully seating both ends so the clips lock automatically.

What maintenance or replacement will this 1Rx4 ECC module need over time?

No routine maintenance is required; if a correctable error count rises or the system logs uncorrectable ECC events, replace the module.

What limit appears first when this CL19 1.20V registered DIMM runs sustained workloads?

The memory controller's thermal throttle point or maximum supported capacity per channel is typically reached before the module's own timing or voltage limits.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。