NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
A 128 GB DDR4 2666 MHz LRDIMM with ECC and octal-rank 3DS/TSV architecture for high-density server workloads
This Supermicro certified 128GB DDR4 2666MHz LRDIMM module targets servers and workstations that require maximum memory capacity per slot. The octal-rank design uses Micron 3DS TSV chips to reach 128GB in a single 288-pin package. ECC load-reduced operation helps maintain data integrity in dense configurations.
Load-reduced buffering reduces electrical load on the memory controller, allowing the module to sustain 2666MHz throughput under continuous multi-threaded workloads. The 1.20V operating voltage and CL19 latency support stable operation during extended compute or virtualisation tasks without thermal throttling.
Verify that your motherboard supports DDR4 LRDIMM modules and the 2S4Rx4 octal-rank organisation before ordering. Confirm the maximum supported capacity per slot and total system capacity in the vendor documentation. Ensure the BIOS revision lists this module or the Micron MTA144ASQ16G72LSZ-2S6E1 part number as qualified.
| Brand | SuperMicro |
|---|---|
| Series | Supermicro Certified |
| Model | MEM-DR412L-CL02-LR26 |
| Capacity | 128GB |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 2S4Rx4 (8Rx4) |
| Chipset | Micron Chipset |
| Features | Supermicro Certified MEM-DR412L-CL02-LR26 (MTA144ASQ16G72LSZ-2S6E1) |
The module runs at the standard DDR4 voltage of 1.20V. As a Load Reduced DIMM, it reduces electrical load on the memory bus, which helps manage power draw in dense configurations. Actual wattage depends on your specific server workload and configuration.
You need a server motherboard with DDR4 288-pin DIMM slots and a CPU memory controller that supports Load Reduced DIMMs and octal-rank (8Rx4) modules. The platform must also support ECC and the PC4-21300 speed grade for full operation.
Mixing Load Reduced DIMMs with standard Registered DIMMs is not supported on any platform. All populated slots must use the same memory technology. Check your system manual for supported population rules with 8Rx4 LRDIMMs.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟