NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
32 GB DDR4 2933 MHz ECC registered RDIMM, CL21 1.20 V, Supermicro certified with Samsung chips
This A-Tech module is a 32GB DDR4 2933MHz CL21 ECC Registered RDIMM built for Supermicro platforms. It uses Samsung chips and carries the MEM-DR432LC-ER29 qualification for direct compatibility. The single stick adds capacity to servers and workstations that require registered error-correcting memory. Installation is a standard 288-pin DIMM insertion.
The decisive specification is the Registered ECC RDIMM design with 2Rx4 organisation. Systems that accept only unbuffered UDIMMs or non-ECC modules cannot use this stick. Buyers must confirm their motherboard or server documentation lists support for registered ECC DDR4 at 2933MHz before ordering. Voltage is 1.20V, matching the DDR4 standard.
This module suits administrators expanding qualified Supermicro servers or replacing failed sticks in validated configurations. It is not for desktop PCs, laptops or consumer motherboards that lack registered ECC support. Builders needing unbuffered memory, higher speeds or larger single-module capacities should look elsewhere.
| Brand | SuperMicro |
|---|---|
| Series | Supermicro Certified |
| Model | MEM-DR432LC-ER29 |
| Capacity | 32GB |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Samsung Chipset |
| Features | Supermicro Certified MEM-DR432LC-ER29 (M393A4K40DB2-CVF) |
The module runs at DDR4 2933 speed, delivering PC4-23400 bandwidth so the memory controller can move data at that rate when the platform supports it.
The 288-pin RDIMM form factor fits registered DIMM slots and the registered buffer lets the memory controller address 2Rx4 ranks reliably at 1.20 V.
It requires a standard DDR4 288-pin RDIMM slot and the module height matches regular server DIMM clearance.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟