نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black straight compression fitting for 13/10mm tubing with G1/4 thread

Alphacool

Alphacool Eiszapfen 13/10mm G1/4 Compression Fitting Black 17226

SKU CH-92B6-Q3DRV

G1/4 straight compression fitting for 13/10 mm tubing with durable matte-black finish and coloured O-ring options

  • TypeFittings

Color Black

  • High-flow design for efficient liquid cooling loops
  • Deep matte black coating resists chipping and peeling
  • G1/4 thread fits 95% of water-cooling components
  • Compatible with 13/10 mm (3/8" x 1/2") tubing
  • Includes three coloured O-rings for customisation

Alphacool Eiszapfen 13/10mm G1/4 Compression

This Alphacool Eiszapfen fitting connects 3/8" ID by 1/2" OD (13/10mm) tubing to any component with a standard G1/4 thread. It is built for custom-loop builders who want a secure, leak-free joint with a premium matte black finish. The package includes one straight compression fitting and three coloured O-rings for visual customisation.

Capacity and headroom

The G1/4 thread fits 95% of water-cooling components on the market, so it handles almost any radiator, block, pump or reservoir port you pair it with. It runs out when you need to join tubing with a different inner or outer diameter, or when your component uses a non-standard thread size. The straight design also limits routing options in very tight bends.

13/10mm hose compatibility

This fitting accepts only 3/8" ID x 1/2" OD (13/10mm) tubing; any other hose size will not seal correctly. The durable coating process bonds the black finish to the metal, preventing chipping or peeling over time. An Alphacool logo on each piece confirms authenticity and helps identify the part during maintenance.

أبرز المميزات

  • High-flow design for efficient liquid cooling loops
  • Deep matte black coating resists chipping and peeling
  • G1/4 thread fits 95% of water-cooling components
  • Compatible with 13/10 mm (3/8" x 1/2") tubing
  • Includes three coloured O-rings for customisation

المواصفات

TypeFittings

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Will the 13/10mm G1/4 fitting thread into the same ports as my existing water-cooling blocks?

The G1/4 thread is compatible with 95% of water-cooling components, so it will fit most existing blocks and radiators.

How can I verify the compression seal is holding after I install the 13/10mm fitting?

Pressurise the loop and watch the O-ring seat; a steady pressure reading with no droplets at the joint confirms the seal.

Does the box include the 13/10mm tubing or just the single black fitting with its three coloured O-rings?

Only one 13/10mm G1/4 compression fitting and three coloured O-rings are supplied; tubing must be purchased separately.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.