نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black straight compression fitting with knurled nut and G1/4 thread

Alphacool

Alphacool Eiszapfen 13/19 mm G1/4 Compression Fitting Black 17238

SKU CH-MR1S-WV59Q

A G1/4 compression fitting for 13 mm inner and 19 mm outer diameter tubing with 95 % component compatibility

  • TypeFittings

Color Black

  • High-flow design supports efficient liquid cooling loops
  • Deep matte black coating resists chipping and peeling over time
  • G1/4 thread fits 95% of standard water-cooling components
  • Slanted nut corners secure O-ring against 13/19 mm hard tubing
  • Includes three coloured O-rings for UV-reactive customisation

Precision Compression Fitting

The Alphacool Eiszapfen 13/19 mm G1/4 fitting is a high-end connector designed for custom liquid-cooling loops using hard tubing. It suits builders who demand a secure, leak-free seal and a consistent matte black aesthetic. The G1/4 thread ensures compatibility with 95% of water-cooling components on the market. This single fitting is sold new for expanding or completing a premium loop.

Coated Brass Construction

A special surface procedure binds the deep matte black coating firmly to the brass body, preventing chipping or peeling during installation or transport. The connecting nut features slanted corners that press the included O-ring tightly against the 13 mm inner diameter, 19 mm outer diameter tubing for enhanced grip. Three coloured O-rings are supplied, including a UV-reactive option for visual customisation under UV light.

High-Flow Low-Restriction Design

The straight internal geometry is engineered for high flow, minimising hydraulic resistance so the pump operates efficiently without added strain. The precise machining and secure O-ring seat maintain a reliable seal under normal system pressure, eliminating drips that could damage hardware. No moving parts or active cooling are involved, so the fitting adds zero noise and negligible thermal load to the loop.

أبرز المميزات

  • High-flow design supports efficient liquid cooling loops
  • Deep matte black coating resists chipping and peeling over time
  • G1/4 thread fits 95% of standard water-cooling components
  • Slanted nut corners secure O-ring against 13/19 mm hard tubing
  • Includes three coloured O-rings for UV-reactive customisation

المواصفات

TypeFittings

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Does the G1/4 thread on this Alphacool Eiszapfen fitting work with most water-cooling components?

Yes, the G1/4 thread is compatible with 95% of components, so it fits nearly every block, radiator, pump or reservoir that uses the same standard.

What tube dimensions does the 17238 fitting accept?

It is made for hard tube with a 13 mm inner diameter and a 19 mm outer diameter; the compression nut and O-ring seal directly on those dimensions.

How do I install the fitting without leaks?

Slide the compression nut over the tube, press the tube fully onto the barb until it seats against the O-ring, then tighten the nut by hand plus a quarter turn with a wrench — the angled nut corners lock the O-ring in place.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.