نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black full-tower case with dual tempered glass side panels and mesh front panel

Antec

Antec Performance 1 FT PC case

SKU CH-E2QQ-Y71CQ MPN Performance 1 FT

Full-tower E-ATX case with dual tempered glass panels, four pre-installed 30 mm Storm T3 PWM fans, a temperature display, USB 3.1 Type-C front port.

  • TypeE-ATX Full Tower Case
  • ColorBlack
  • Case MaterialSteel / Plastic / Tempered Glass
  • With Power SupplyNo
  • Motherboard CompatibilityATX / E-ATX / Micro ATX / Mini ITX
  • Side Panel2 x Sides Tempered Glass Panel

Options Performance 1 FT

  • Glance CPU and GPU temps on the built-in display
  • iUnity software shows live system specs and usage
  • Front Type-C 10Gbps port enables fast data transfers
  • Dual 4mm tempered glass panels showcase the full build
  • Four pre-installed 30mm Storm T3 PWM fans deliver strong airflow

Full-tower chassis for high-end builds

The Antec Performance 1 FT is a black steel full-tower case that accepts ATX, E-ATX, Micro-ATX and Mini-ITX motherboards. Dual 4 mm tempered glass side panels showcase the interior. Four pre-installed Storm T3 PWM fans with 30 mm thickness provide immediate airflow. A removable top cooling bracket simplifies radiator installation.

Builders who need dual 360 mm radiators

This case suits enthusiasts planning liquid cooling with up to two 360 mm radiators simultaneously and graphics cards up to 400 mm long. CPU coolers up to 175 mm tall and power supplies up to 245 mm long also fit. Systems that require more than two internal 3.5-inch drive bays or an included power supply should look elsewhere.

400 mm maximum graphics card length

The 400 mm GPU clearance is the single specification that decides compatibility for modern high-end cards. Measure your card before purchase; longer models will not fit. The front I/O includes a 10 Gbps Type-C port, two USB 3.0 ports, a combo audio jack and a temperature display switch that toggles CPU or GPU readouts when Antec iUnity software is installed.

أبرز المميزات

  • Glance CPU and GPU temps on the built-in display
  • iUnity software shows live system specs and usage
  • Front Type-C 10Gbps port enables fast data transfers
  • Dual 4mm tempered glass panels showcase the full build
  • Four pre-installed 30mm Storm T3 PWM fans deliver strong airflow

المواصفات

BrandAntec
ModelPerformance 1 FT
TypeE-ATX Full Tower Case
ColorBlack
Case MaterialSteel / Plastic / Tempered Glass
With Power SupplyNo
Motherboard CompatibilityATX / E-ATX / Micro ATX / Mini ITX
Side Panel2 x Sides Tempered Glass Panel
Dust FiltersBottom / Front / Top
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays3
Expansion Slots8
Front Ports2 x Buttons, 2 x USB 3.0, 1 x USB 3.1 Type-C, 1 x Audio, Temp. Display Switch x 1
Fan OptionsFront - 3 x 120mm / Front - 3 x 140mm / Rear - 1 x 120mm / Top - 3 x 120mm / Top - 3 x 140mm
Radiator InstalledFront - 3 x 140mm / Rear - 1 x 120mm
Radiator OptionsFront - Up to 420mm / Rear - Up to 120mm / Top - Up to 360mm
Max GPU Length400 mm
Max CPU Cooler Height175 mm
Max PSU Length245 mm
وزن الشحنة13.61 kg
أبعاد الطرد616 × 595 × 310 mm

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Will my existing 360 mm radiator fit on the top of this case?

Yes, the top supports radiators up to 360 mm so your current unit will mount without modification.

How do I confirm the temperature display is reading correctly after I build the system?

Install the Antec iUnity software, then press the I/O switch button to cycle between CPU and GPU temperatures on the front display.

Which fans come pre-installed and what must I purchase separately for the rear and top positions?

Four 140 mm Storm T3 PWM fans of 30 mm thickness are pre-installed at the front; rear and top fan mounts are empty and require separate fans.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.