Antec P6 Neo ARGB Mid-Tower ATX PC Case
- ATX Mid Tower
- Steel / Plastic
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Antec
A mid-tower ATX case with a mesh front panel, wood accents and five pre-installed PWM fans that direct airflow straight to the GPU, supporting a 360 mm top radiator and 405 mm graphics cards
Options P30 AIR
The Antec P30 AIR is a mid-tower ATX chassis built from steel, plastic and wood with a metal mesh front panel and chamfered design. It supports ATX, Micro-ATX and ITX motherboards and includes a tool-free 4mm tempered glass side panel. The case targets builders who want distinctive aesthetics alongside high airflow capacity.
The box contains two 140mm PWM fans at the front, two 120mm PWM reverse fans on the PSU shroud and one 120mm PWM fan at the rear. The reverse fans push air directly toward the graphics card while the front mesh and side intake feed the layout. Dust filters on the top and bottom help balance cooling with cleanliness.
The top panel accepts radiators up to 360mm while the front supports up to 240mm, giving flexibility for liquid cooling. Maximum GPU length is 405mm, CPU cooler height is 175mm and power supply length is 270mm. Front I/O provides a USB Type-C 3.2 Gen 2 port at 10 Gbps, two USB 3.0 ports and a headphone/mic combo jack.
| Brand | Antec |
|---|---|
| Model | P30 Air |
| Type | ATX Mid Tower |
| Color | Black |
| Case Material | Steel / Plastic / Wood |
| Motherboard Compatibility | ATX / ITX / Micro ATX |
| Side Panel | 4mm Tempered Glass |
| Dust Filters | Bottom / Top |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 1 |
| Expansion Slots | 7 |
| Fan Options | Included Fan(s): 2 x 140mm PWM ARGB fans at the front + 2 x 120mm PWM Reverse fans on the PSU Shroud+ 1 x 120mm PWM ARGB fan at the rear |
| Radiator Options | Front - Up to 120mm / Front - Up to 140mm / Front - Up to 240mm / Rear - Up to 120mm / Top - Up to 120mm / Top - Up to 240mm / Top - Up to 360mm |
| Max GPU Length | 405 mm |
| Max CPU Cooler Height | 175 mm |
| Max PSU Length | 270 mm |
| Dimensions | 18.82 x 8.74 x 18.31inch |
| Weight | 6.85kg |
| وزن الشحنة | 8.24 kg |
| أبعاد الطرد | 552 × 552 × 292 mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Remove the magnetic top filter and slide-out bottom filter every few months; rinse with water, dry fully, and refit to stop dust from choking the 140 mm front intakes.
The GPU reaches its temperature ceiling first because the 405 mm length restriction packs high-wattage cards close to the PSU shroud, so the reverse 120 mm fans must stay at high PWM duty.
At full PWM the five fans move enough air for a 360 mm top radiator, so expect a noticeable but not intrusive hum and exhaust air warm to the touch.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟