ASRock TC-1650T 1650 W ATX 3.1 fully modular power supply
- Black
- ATX3.1 & PCIe5.1
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
ASRock
Delivers 1300 W through a fully modular ATX 3.1 design with Cybenetics Titanium efficiency and a 135 mm FDB fan rated Lambda A+ for quiet operation
Options 1300W
The ASRock TC-1300T delivers 1300 W of fully modular power built to the ATX 3.1 and PCIe 5.1 specifications. It targets high-end desktop builders who need reliable headroom for demanding graphics cards and multi-core processors. The unit carries 80 PLUS Titanium and Cybenetics Titanium efficiency ratings alongside a Cybenetics A+ noise certification. Japanese capacitors are used throughout for long-term stability.
The single specification that decides compatibility is the native 12V-2x6 connector, which supports the PCIe 5.1 235% power excursion requirement. A dual-colour design lets you confirm full insertion at a glance, while an integrated NTC sensor monitors connector temperature and signals the PSU to protect against overheating. This connector replaces older 12VHPWR implementations and is mandatory for current-generation flagship GPUs.
Full modularity means you connect only the cables your build requires, reducing clutter and improving airflow inside the case. The 135 mm striped axial FDB fan operates under iCool intelligent control: it remains off at low to medium loads for silent running and spins up only when load or temperature rises. A +5 V Boost switch adds 200 mV to the +5 V rail, maintaining approximately 5.2 V when voltage drop is detected, which helps stability on heavily loaded 5 V circuits.
| Brand | ASRock |
|---|---|
| Model | TC-1300T |
| Color | Black |
| Type | ATX3.1 & PCIe5.1 |
| Maximum Power | 1300 W |
| Fans | 135mm Striped Axial FDB Fan |
| Modular | Full Modular |
| Energy-Efficient | Cybenetics Titanium |
| PSU Noise Level | Cybenetics A+ |
| وزن الشحنة | 4.40 kg |
| أبعاد الطرد | 400 × 272 × 118 mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The unit is rated to handle up to 235% power excursion, so it can absorb short transients well above its continuous 1300 W rating without shutting down.
It includes a native 12V-2x6 connector that supports the higher current demands of modern graphics cards under the latest specification.
Yes, the 135 mm striped axial FDB fan uses the conventional ATX mounting pattern, so it installs in any case designed for a regular ATX power supply.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟