نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black mid-tower PC case with tempered glass left panel and three pre-installed fans

ASUS

ASUS ProArt PA602 Mid-Tower PC Case Black

SKU CH-VCNY-ZNKFN

Mid-tower chassis fits EATX boards up to 12 x 10.9 inches, includes three pre-installed PWM fans, supports 420 mm top radiators, and offers 440 mm GPU clearance

  • Supports EATX boards up to 12 x 10.9 inches for high-end builds
  • Fits 420 mm top radiators for heavy liquid cooling
  • Three pre-installed PWM fans (two 200 mm front, one 140 mm rear) deliver strong airflow out of the box
  • Infrared dust sensor monitors filter cleanliness to protect components
  • 30 mm rear cable space keeps wiring tidy and airflow clear

Build focus

The ProArt PA602 is a mid-tower chassis designed for creators who need EATX motherboard support up to 12 by 10.9 inches and room for graphics cards up to 440 mm long. Eight expansion slots plus two additional vertical positions give flexibility for add-in cards while the tempered glass left panel shows the interior.

Daily thermals

Two pre-installed 200 mm front fans and a 140 mm PWM rear fan move air through removable filters on the bottom, top and front. A 30 mm rear cable management channel keeps routing tidy and an infrared dust sensor alerts when cleaning is needed so noise stays low during typical workloads.

Sustained loads

The top panel accepts radiators up to 420 mm and can mount three 140 mm or three 120 mm fans for extended liquid-cooling capacity. CPU coolers up to 185 mm tall and power supplies up to 190 mm deep fit without restricting airflow during long rendering sessions.

أبرز المميزات

  • Supports EATX boards up to 12 x 10.9 inches for high-end builds
  • Fits 420 mm top radiators for heavy liquid cooling
  • Three pre-installed PWM fans (two 200 mm front, one 140 mm rear) deliver strong airflow out of the box
  • Infrared dust sensor monitors filter cleanliness to protect components
  • 30 mm rear cable space keeps wiring tidy and airflow clear

المواصفات

BrandASUS

أسئلة حول هذا المنتج

How do I install the motherboard and which step often trips people up?

Mount the board on the included standoffs for Mini-ITX, Micro-ATX, ATX or EATX up to 12 x 10.9 inches; the common mistake is forgetting the extra EATX standoffs before lowering the board.

What maintenance will the dust filters need later?

Pull the removable filters at the bottom, top and front, rinse or vacuum them, then snap them back in; the infrared dust sensor will alert you when airflow drops.

What thermal limit appears first during a long render?

The CPU cooler height caps at 185 mm, so tall tower coolers hit the side panel before the 420 mm top radiator limit becomes relevant.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.