OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
ASUS
Mid-tower chassis fits EATX boards up to 12 x 10.9 inches, includes three pre-installed PWM fans, supports 420 mm top radiators, and offers 440 mm GPU clearance
The ProArt PA602 is a mid-tower chassis designed for creators who need EATX motherboard support up to 12 by 10.9 inches and room for graphics cards up to 440 mm long. Eight expansion slots plus two additional vertical positions give flexibility for add-in cards while the tempered glass left panel shows the interior.
Two pre-installed 200 mm front fans and a 140 mm PWM rear fan move air through removable filters on the bottom, top and front. A 30 mm rear cable management channel keeps routing tidy and an infrared dust sensor alerts when cleaning is needed so noise stays low during typical workloads.
The top panel accepts radiators up to 420 mm and can mount three 140 mm or three 120 mm fans for extended liquid-cooling capacity. CPU coolers up to 185 mm tall and power supplies up to 190 mm deep fit without restricting airflow during long rendering sessions.
| Brand | ASUS |
|---|
Mount the board on the included standoffs for Mini-ITX, Micro-ATX, ATX or EATX up to 12 x 10.9 inches; the common mistake is forgetting the extra EATX standoffs before lowering the board.
Pull the removable filters at the bottom, top and front, rinse or vacuum them, then snap them back in; the infrared dust sensor will alert you when airflow drops.
The CPU cooler height caps at 185 mm, so tall tower coolers hit the side panel before the 420 mm top radiator limit becomes relevant.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?