OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
ASUS
Supports LGA 2011-v3 CPUs with Intel X99 chipset and up to 64GB DDR4 in a Micro ATX form factor
This ASUS X99-M WS motherboard targets builders who need a compact Intel X99 platform for professional workloads. The Micro ATX layout fits smaller chassis while still delivering the chipset’s multi-threaded capability. It suits users upgrading an existing LGA 2011-v3 system or assembling a dedicated render node. Buyers who require newer socket types or higher memory ceilings should look elsewhere.
The single specification that decides fit is the 64 GB DDR4 limit imposed by the X99 chipset and the board’s four DIMM slots. Populate all slots with matching modules to reach the ceiling for memory-heavy applications. If your workflow demands more capacity or a different memory standard, this board cannot meet the requirement.
The board draws modest power for the chipset and voltage regulation under typical multi-core loads. Passive heatsinks on the PCH and VRM zones keep temperatures stable without adding active noise. A standard case airflow path is sufficient; no specialised cooling is mandated by the design.
| Brand | ASUS |
|---|---|
| Model | ASUS X99-M WS |
| CPU Socket Type | LGA 2011-v3 |
| Chipset | Intel X99 |
| Maximum Memory Supported | 64GB |
The four DDR4 slots can hold up to 64 GB total, so a fully populated system reaches that limit without needing a larger ATX board.
SATA caps sequential throughput at the interface's native rate, so any connected SSD or hard drive will not exceed that ceiling.
The socket follows the standard 2011-v3 mounting pattern, so any cooler rated for that layout will fit within the Micro ATX keep-out zone.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟