نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Silver rectangular server PSU with dual fans and black cables

Athena Power

Athena Power AP-2UMK10P868 1000W 80 PLUS Platinum server power supply

SKU CH-45H5-SJR67

A 1000W ATX 3.1 server power supply with 80 PLUS Platinum efficiency and dual cooling fans

  • TypeATX
  • Single/RedundantSingle
  • Maximum Power1000W
  • Fans2
  • Main Connector24-pin ATX (20+4)
  • Output Current+3.3V 18A, +5V 18A, +12V1/12V2 82A, -12V 0.5A, +5VSB 3.0A
  • 1000W continuous power fuels demanding GPU workloads
  • 80 PLUS Platinum efficiency above 92% cuts energy waste
  • ATX 3.1 and PCIe 5.0 ready with 12V-2x6 connector
  • Dual 60mm smart thermal fans maintain reliable cooling
  • IEC/UL 62368-1 certified with 100000-hour MTBF at 25°C

Industrial U2 1000W server supply

The Athena Power AP-2UMK10P868 is a single 1000W ATX 3.1 power supply built for workstations, edge servers and GPU-intensive platforms. It delivers continuous output with a 12V-2x6 connector for modern graphics cards and includes dual EPS 8-pin plus 8(4+4)-pin CPU connectors for dual-processor boards. The unit carries 80 PLUS Platinum certification and active PFC across a universal 100-240V input range.

Dual 60mm thermal-controlled cooling

Two ball-bearing fans adjust speed based on internal temperature, keeping the supply within its 0 to 50°C operating window while MTBF is rated at 100,000 hours at 25°C and full load. Efficiency exceeds 92 percent at typical loads, reducing waste heat and acoustic output compared to lower-rated units. Protections include OVP and OCP, and hold-up time is 17 ms at nominal input.

Replaces older ATX 3.0 or 2.x units lacking 12V-2x6

The jump is worthwhile when a build needs the PCIe 5.0 GPU connector, dual CPU power for server boards, or Platinum-grade efficiency for 24/7 operation. Builds staying on a single mid-range GPU with standard 8-pin power and no redundant supply requirement will not use the extra connectors or efficiency headroom.

أبرز المميزات

  • 1000W continuous power fuels demanding GPU workloads
  • 80 PLUS Platinum efficiency above 92% cuts energy waste
  • ATX 3.1 and PCIe 5.0 ready with 12V-2x6 connector
  • Dual 60mm smart thermal fans maintain reliable cooling
  • IEC/UL 62368-1 certified with 100000-hour MTBF at 25°C

المواصفات

BrandAthena Power
SeriesU2
ModelAP-2UMK10P868
TypeATX
Single/RedundantSingle
Maximum Power1000W
Fans2
Main Connector24-pin ATX (20+4)
Output Current+3.3V 18A, +5V 18A, +12V1/12V2 82A, -12V 0.5A, +5VSB 3.0A
Output1000W
Input Voltage100 - 240 V
Input Frequency Range50 - 60 Hz
Input Current13A@110V, 6A@ 240V
MTBF100,000 Hours on Maximum Load at +25 degree C
Efficiency> 92%
Hold-up Time17 ms Minimum at Nominal Input Voltage
ProtectionOVP, OCP
Features1000W output, 80 PLUS Platinum efficiency, ATX 3.1 / PCIe 5.0 compatible, dual cooling fans, EPS-12V CPU support, low ripple, active PFC, IEC/UL 62368-1 certified, RoHS, 5-Year warranty
Dimensions(D x W x H)200 × 100 × 69.7?mm (7.87 × 3.93 × 2.75?in)
Weight5 lbs
HumidityOperating Humidity: 5–85% RH, non-condensing, Storage Humidity: 5–95% RH, non-condensing
TemperatureOperating: 0°C ~ +50°C on Full Load; Storage & Shipping: -20°C ~ +80°C

أسئلة حول هذا المنتج

How do I install the 24-pin ATX and 12V-2x6 connectors without bending pins?

Align the 24-pin ATX (20+4) and 12V-2x6 GPU connectors squarely before pressing; the keyed shapes prevent reverse insertion. Route cables behind the motherboard tray first, then seat each connector firmly until the latch clicks. Do not force angled insertion — bent pins on the 12V-2x6 can cause 12V rail instability.

Which components need replacement first during long-term 24/7 operation?

The dual 60mm ball-bearing fans are the primary wear items; MTBF is rated 100,000 hours at 25 °C full load. Dust buildup reduces airflow, so clean fan blades and heatsink fins every 6-12 months. Electrolytic capacitors on the secondary side may drift after 5-7 years of continuous 1000W operation.

What thermal limit appears first when the unit runs at 1000W continuously?

At sustained 1000W the +12V rail delivers 82A and internal temperatures rise until the smart thermal control ramps both fans to maximum. The 50 °C operating-temperature ceiling is reached before any protection triggers; hold-up time remains 17 ms. Ensure chassis airflow keeps intake air below 40 °C to avoid throttling.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.