OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
AZZA
ATX mid-tower case with tempered glass panel, four included 120 mm ARGB fans, and support for up to ten 120 mm fans for high-airflow builds
The AZZA CSAZ-501B Tiara is an ATX mid-tower chassis with a tempered glass side panel. It supports ATX, Micro-ATX and ITX motherboards, including back-connect designs. Four 120 mm ARGB PWM fans are included, and the case can hold up to ten 120 mm fans in total. Builders who want extensive air cooling and a showcase window will find the layout practical.
The Tiara replaces enclosures that restrict graphics card length or CPU cooler height. It accepts GPUs up to 400 mm long and 155 mm wide, while CPU coolers up to 170 mm tall fit comfortably. The jump is worth it when a previous chassis forced component compromises or lacked dedicated top and bottom fan mounts for radiator or direct GPU cooling.
Motherboard standoffs match ATX, Micro-ATX and ITX patterns, and the PSU shroud includes removable brackets for the three bottom fan mounts. The front panel bundles power, LED control, combo audio, two USB 3.0 ports and one USB Type-C connector. Cable routing channels run behind the motherboard tray. Builders must verify their motherboard header layout for the ARGB PWM control board and the front-panel Type-C connection.
| Type | ATX Mid Tower |
|---|---|
| Color | Black/White |
| Motherboard Compatibility | ATX(Back-connect supported) ?Micro ATX?ITX |
| Side Panel | Side panel: Tempered Glass |
| External 5.25" Drive Bays | 0 |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 4 |
| Expansion Slots | 7 |
| Front Ports | Power button, LED button, Combo HD Audio, USB 3.0 x 2,Type C x1 |
| Fan Options | 3x120mm on the mb side (3x120mm LFO-5612DR ARGB&PWM Fan included) 3x120mm or 2x140mm fan ports on the top 1x120mm fan port in the rear (1x120mm LFO-5612D ARGB&PWM Fan included) 3 x 120 mm fan ports on the PSU shroud |
| Max GPU Length | Up to 400 mm,Wide<155mm |
| Max CPU Cooler Height | 170 mm |
| Dimensions | 482x225x420mm / 19x8.9x16.5 inches |
| Weight | 6.38Kg /14lbs |
The case accepts ATX, Micro ATX and ITX boards; ATX back-connect motherboards are supported.
Plug each fan into the onboard ARGB&PWM control board, then use the top-panel LED button or motherboard software to change modes.
Filters sit on the bottom panel and top panel; remove and rinse them periodically to maintain airflow.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟