EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
BFG Technologies
ATX12V 2.2 / EPS12V 2.8 unit delivers 680W continuous at 40°C with four +12V rails, SLI certification and 80 PLUS efficiency up to 85%
The BFG Tech LS-680 delivers 680 W of continuous DC power at 40 °C. It follows the ATX12V 2.2 and EPS12V 2.8 specifications and carries 80 PLUS certification with up to 85 % efficiency. A single 135 mm thermal-controlled fan adjusts speed to load. Four +12 V rails each provide up to 20 A, while the +3.3 V and +5 V rails supply 24 A and 30 A respectively.
This unit suits builders running two graphics cards because it includes two 6-pin and two 6+2-pin PCIe connectors, removing the need for adapters. SLI certification and CrossFire readiness confirm multi-GPU support. Active PFC and full protection circuits (over-voltage, overload) add stability for high-draw systems. It is not for compact cases that cannot fit a standard ATX power supply, nor for builds that require more than four +12 V rails or higher per-rail current than 20 A.
The four +12 V rails are each rated at 20 A, which determines how much current is available for CPU and graphics power phases. If your components demand more than 20 A on any single +12 V rail, this supply will not meet that requirement.
| Brand | BFG Tech |
|---|---|
| Series | LS SERIES |
| Model | LS-680 |
| Type | ATX12V 2.2 / EPS12V 2.8 |
| Maximum Power | 680W Continuous @ 40°C |
| Fans | 1 x 135mm Thermal Controlled Fan |
| PFC | Active |
| Main Connector | 20+4Pin |
| +12V Rails | 4 |
| PCI-Express Connector | 2 x 6-Pin, 2 x 6+2-Pin |
| SLI | SLI Certified |
| CrossFire | CrossFire Ready |
| Efficiency | Up to 85% @ Full & Typical Load |
| Energy-Efficient | 80 PLUS Certified |
| Over Voltage Protection | Yes |
| Overload Protection | Yes |
| Input Voltage | 100 - 240 V |
| Input Frequency Range | 50/60 Hz |
| Input Current | 8.5 / 3.5A |
| Output | +3.3V@24A,+5V@30A,+12V1@20A,+12V2@20A,+12V3@20A,+12V4@20A, [email protected] , [email protected] |
| Approvals | UL, CB, TUV, CD, FCC |
| Connectors | 1 x Main connector (20+4Pin) 1 x 12V(4+4Pin) 6 x peripheral 8 x SATA 2 x Floppy 4 x PCI-E |
| Features | Ultra Quiet Thermal Controlled 135mm Fan Sleeved Cabling Active PFC: Inceases Power Factor & Reduces Distortion Four Independent +12VDC Outputs ATX 20+4Pin Main Connector ATX12V / EPS12V CPU 4+4Pin 1 x PCI Express Power 6Pin 1 x PCI Express Power 6+2Pin High Efficiency Design - 80 PLUS Certified Part Number: BFGR680WLSPSU |
| Dimensions | 3.4" x 6" x 6.4" |
| وزن الشحنة | 2.63 kg |
| أبعاد الطرد | 265 × 202 × 100 mm |
Yes, the 680W figure is rated for continuous operation at 40°C, not just at room temperature.
The supply includes two 6-pin and two 6+2-pin PCIe connectors, enough for a dual-card SLI or CrossFire setup.
It guarantees at least 80% efficiency at typical loads, rising to 85% at full load, so less power is wasted as heat.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟