Micron Technology, Inc. MT4JTF12864AZ-1G4D1 1GB DDR3 1333 Desktop RAM
- 1GB
- DDR3 1333 (PC3 1060…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
BFG Technologies
ATX12V 2.2 / EPS12V 2.8 unit delivers 680W continuous at 40°C with four +12V rails, SLI certification and 80 PLUS efficiency up to 85%
The BFG Tech LS-680 delivers 680 W of continuous DC power at 40 °C. It follows the ATX12V 2.2 and EPS12V 2.8 specifications and carries 80 PLUS certification with up to 85 % efficiency. A single 135 mm thermal-controlled fan adjusts speed to load. Four +12 V rails each provide up to 20 A, while the +3.3 V and +5 V rails supply 24 A and 30 A respectively.
This unit suits builders running two graphics cards because it includes two 6-pin and two 6+2-pin PCIe connectors, removing the need for adapters. SLI certification and CrossFire readiness confirm multi-GPU support. Active PFC and full protection circuits (over-voltage, overload) add stability for high-draw systems. It is not for compact cases that cannot fit a standard ATX power supply, nor for builds that require more than four +12 V rails or higher per-rail current than 20 A.
The four +12 V rails are each rated at 20 A, which determines how much current is available for CPU and graphics power phases. If your components demand more than 20 A on any single +12 V rail, this supply will not meet that requirement.
| Brand | BFG Tech |
|---|---|
| Series | LS SERIES |
| Model | LS-680 |
| Type | ATX12V 2.2 / EPS12V 2.8 |
| Maximum Power | 680W Continuous @ 40°C |
| Fans | 1 x 135mm Thermal Controlled Fan |
| PFC | Active |
| Main Connector | 20+4Pin |
| +12V Rails | 4 |
| PCI-Express Connector | 2 x 6-Pin, 2 x 6+2-Pin |
| SLI | SLI Certified |
| CrossFire | CrossFire Ready |
| Efficiency | Up to 85% @ Full & Typical Load |
| Energy-Efficient | 80 PLUS Certified |
| Over Voltage Protection | Yes |
| Overload Protection | Yes |
| Input Voltage | 100 - 240 V |
| Input Frequency Range | 50/60 Hz |
| Input Current | 8.5 / 3.5A |
| Output | +3.3V@24A,+5V@30A,+12V1@20A,+12V2@20A,+12V3@20A,+12V4@20A, [email protected] , [email protected] |
| Approvals | UL, CB, TUV, CD, FCC |
| Connectors | 1 x Main connector (20+4Pin) 1 x 12V(4+4Pin) 6 x peripheral 8 x SATA 2 x Floppy 4 x PCI-E |
| Features | Ultra Quiet Thermal Controlled 135mm Fan Sleeved Cabling Active PFC: Inceases Power Factor & Reduces Distortion Four Independent +12VDC Outputs ATX 20+4Pin Main Connector ATX12V / EPS12V CPU 4+4Pin 1 x PCI Express Power 6Pin 1 x PCI Express Power 6+2Pin High Efficiency Design - 80 PLUS Certified Part Number: BFGR680WLSPSU |
| Dimensions | 3.4" x 6" x 6.4" |
| Shipping weight | 2.63 kg |
| Package size | 265 × 202 × 100 mm |
Yes, the 680W figure is rated for continuous operation at 40°C, not just at room temperature.
The supply includes two 6-pin and two 6+2-pin PCIe connectors, enough for a dual-card SLI or CrossFire setup.
It guarantees at least 80% efficiency at typical loads, rising to 85% at full load, so less power is wasted as heat.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?