نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Red gold silk PLA filament spool 1.75mm

BFKK

BFKK 1.75mm Silk PLA Filament Red Gold Dual Color 1kg

SKU CH-7AWP-ZP1NJ

Dual-colour 1.75 mm silk PLA filament on a 1 kg spool prints pearlescent red-gold surfaces without polishing

  • Silk-like pearlescent finish without polishing
  • Dual-colour coextrusion prints two shades in one spool
  • 75 mm diameter tolerance ensures consistent feeding
  • Compatible with most FDM printers and 3D pens
  • 100 % tangle-free on the spool

Silk PLA for multi-colour prints

BFKK 1.75 mm Silk PLA filament combines two colours in a single strand so one spool produces prints with a red-gold gradient. The co-extruded material is aimed at makers who want pearlescent surfaces without post-processing and who print on common FDM machines or 3D pens.

Low-odour feed with tight tolerance

The filament holds a 1.75 mm diameter tolerance that promotes consistent feeding and reduces jams or warping during normal use. Low odour and bubble-free extrusion keep the printing environment pleasant while the silk-like finish emerges straight from the nozzle.

Nozzle guidance and tangle prevention

A fresh 0.4 mm or larger nozzle is recommended to realise the best surface quality from the silk formulation. Each spool ships 100 % tangle-free; securing the free end in the spool holes after every print prevents knots and ensures reliable feeding for the next session.

أبرز المميزات

  • Silk-like pearlescent finish without polishing
  • Dual-colour coextrusion prints two shades in one spool
  • 75 mm diameter tolerance ensures consistent feeding
  • Compatible with most FDM printers and 3D pens
  • 100 % tangle-free on the spool

المواصفات

لا توجد مواصفات منشورة لهذا المنتج بعد.

أسئلة حول هذا المنتج

How do I load the 1.75mm Silk PLA onto my FDM printer without the first layer failing?

Mount the spool so filament unwinds counter-clockwise, push the tip straight through the PTFE tube into the hot-end, and extrude until the dual red-gold colour flows cleanly; the step most people skip is seating the filament fully against the nozzle before starting the print.

What upkeep does the 1 kg spool need after it is opened?

After every print, clip the free end into the spool’s side holes to keep the factory 100 % tangle-free state; store the coil in a sealed bag with desiccant because PLA absorbs moisture and will bubble or jam on the next run.

What is the first limitation I will hit when printing long jobs with this Silk PLA?

The 1.75 mm diameter tolerance and silk additive mean heat builds up in the melt zone; on extended prints the filament can soften inside the PTFE tube and cause a jam, so watch for under-extrusion as the earliest sign.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.