نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Small silver brass barb fitting with G1/4 thread and 3/8 tubing end

Bitspower

Bitspower BP-WTP-C02 G1/4" to 3/8" Barb Fitting Silver Shining

SKU CH-HWQ3-KXRT7 MPN BP-WTP-C02

Connects 3/8" ID soft tubing to G1/4" water-block threads with a hidden O-ring seal

  • TypeFittings
  • G1/4" thread connects to standard water-blocks
  • 3/8" barb secures soft tubing with 3/8" ID
  • Brass body resists corrosion in liquid loops
  • Hidden O-ring design seals without extra washers
  • Silver Shining finish matches silver-themed builds

G1/4" to 3/8" Barb Fitting

This Bitspower fitting connects soft tubing with a 3/8" inner diameter to components using a standard G1/4" thread. It is built from high-quality brass with a Silver Shining finish. The hidden O-ring design provides a secure seal inside the thread. This component is designed for custom water-cooling loops.

For 3/8" ID soft tubing builds

This fitting suits builders assembling a loop with 3/8" inner diameter tubing and G1/4" threaded ports. It is not for systems using hard tubing or tubing with a different inner diameter. Buyers needing a compression fitting instead of a barb should look at a different style. It also does not fit components with non-standard thread sizes.

5 mm thread length

The male G1/4" thread measures 5 mm in length, which determines how deep it seats into a waterblock or radiator port. Verify that your component's thread depth accommodates this measurement. The tubing side extends 15 mm for the barb connection. This specific dimension decides if the fitting clears obstacles or seats fully.

أبرز المميزات

  • G1/4" thread connects to standard water-blocks
  • 3/8" barb secures soft tubing with 3/8" ID
  • Brass body resists corrosion in liquid loops
  • Hidden O-ring design seals without extra washers
  • Silver Shining finish matches silver-themed builds

المواصفات

TypeFittings

أسئلة حول هذا المنتج

What tubing inner diameter must I already have for this G1/4" to 3/8" barb fitting?

You need soft tubing with a 3/8" inner diameter; the barb side is sized for that exact bore.

Will the 5 mm thread length engage properly in my existing G1/4" water-block ports?

Yes, the 5 mm G1/4" thread is the standard depth used by most water-blocks and radiators.

How can I confirm the hidden O-ring is sealing after I tighten the fitting?

Pressurise the loop and watch the joint — no coolant should appear at the thread or barb junction.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.