نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green 288-pin DDR4 server memory module with black chips and silver label

Brute Networks

Brute Networks 8GB DDR4-2933 1Rx8 1.20V Registered ECC server RAM

SKU CH-N56M-98FGG

8GB registered ECC DDR4-2933 module with 1Rx8 organisation for HPE-compatible servers

  • Capacity8GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8 GB capacity expands server memory headroom
  • DDR4-2933 speed delivers 23400 MT/s data rate
  • Registered ECC design protects data integrity
  • 20 V operation reduces power draw
  • 288-pin DIMM fits standard DDR4 server slots

HPE-Compatible 8GB DDR4-2933 Registered ECC

This 8GB DDR4-2933 Registered ECC module is built for servers that require HPE part number P19040-H21 compatibility. It operates at 1.20V with a 1Rx8 rank configuration on a 288-pin DDR4 SDRAM form factor. The module uses major-brand chips from Samsung, SK Hynix, or Micron and is validated for 100% compatibility with the target platform. It is intended for administrators maintaining existing DDR4 infrastructure.

Sustained load stability through registered

The registered design places a buffer between the memory controller and the DRAM chips, reducing electrical load on the bus during continuous operation. ECC circuitry detects and corrects single-bit errors in real time, preventing data corruption during long-running workloads. Major-brand components are 100% tested and validated to maintain signal integrity at the rated 2933 MT/s speed. Orders are filled with identically matched modules to avoid timing mismatches.

DDR4 platform limits define upgrade ceiling

The DDR4 interface caps bandwidth at the PC4-23400 specification, so this module cannot exceed the 2933 MT/s data rate. Capacity is fixed at 8GB per DIMM, limiting total memory to the number of slots the server provides. Registered ECC modules are not interchangeable with unbuffered or non-ECC variants, so mixed populations are not supported. Buyers needing higher densities or faster speeds must migrate to a newer memory generation.

أبرز المميزات

  • 8 GB capacity expands server memory headroom
  • DDR4-2933 speed delivers 23400 MT/s data rate
  • Registered ECC design protects data integrity
  • 20 V operation reduces power draw
  • 288-pin DIMM fits standard DDR4 server slots

المواصفات

BrandHPE
Capacity8GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset

أسئلة حول هذا المنتج

How much heat and power does this 1.20 V registered ECC DDR4-2933 module add when the server runs all day?

The module operates at 1.20 V and DDR4-2933 speed with a single-rank 1Rx8 layout, which keeps power draw and thermal output low for continuous server workloads.

What server platform must already support 288-pin registered DDR4 ECC memory for this stick to function?

The module requires a server motherboard with 288-pin DDR4 slots that accept registered ECC memory at 1.20 V.

Will this 1Rx8 registered ECC DDR4-2933 stick work alongside older DDR4 modules in the same server?

Mixing ranks, speeds or voltages can prevent the system from posting; the server will run all installed modules at the lowest common speed and voltage, so identical modules are recommended.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.