نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

Computer Memory Solutions

Computer Memory Solutions 16GB (4x4GB) DDR3 1333 ECC Registered DIMM Kit B128

SKU CH-RGZC-86G01

16 GB kit of four 4 GB DDR3 1333 ECC registered DIMMs for Supermicro X8 series motherboards

  • Capacity16GB (4 x 4GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 16 GB kit expands server capacity to the board limit
  • ECC registered design protects data integrity in critical workloads
  • DDR3-1333 CL9 timing matches Supermicro X8 specifications
  • 240-pin DIMM form factor fits the six registered slots
  • 5 V operation aligns with platform voltage requirements

Server-grade ECC registered kit

This 16 GB kit contains four 4 GB DDR3 registered DIMMs that run at 1333 MHz with CL9 timing and 1.5 V operation. Each module is dual-rank 2Rx4 and includes ECC for data-integrity protection in server workloads.

Suited for Supermicro X8 platforms

The memory is validated for Supermicro X8Sit-Hf, X8Siu-F and X8Sia-F motherboards that accept registered ECC DIMMs. Systems requiring unbuffered ECC UDIMMs, non-ECC modules or higher-speed DDR3 will not be compatible with this kit.

Capacity ceiling and headroom

The four-module kit populates four of the six available DIMM slots and delivers 16 GB total, leaving two slots free for expansion. The platform supports up to 32 GB of registered ECC memory, so the kit provides half the maximum registered capacity.

أبرز المميزات

  • 16 GB kit expands server capacity to the board limit
  • ECC registered design protects data integrity in critical workloads
  • DDR3-1333 CL9 timing matches Supermicro X8 specifications
  • 240-pin DIMM form factor fits the six registered slots
  • 5 V operation aligns with platform voltage requirements

المواصفات

BrandComputer Memory Solutions
ModelCM5127210600ECCR2R4H
Capacity16GB (4 x 4GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderBased on Current Inventory (If Required Please Contact)
Compatible SystemSupermicro X8Sit-Hf, X8Siu-F, X8Sia-F Motherboard
Package Content4 Memory RAM Sticks

أسئلة حول هذا المنتج

Does my Supermicro motherboard need to support registered ECC DDR3 memory for this kit to work?

Yes — the modules are 240-pin DDR3 1333 registered ECC DIMMs, so the board must accept registered ECC memory at that speed.

Can I mix these registered DIMMs with the unbuffered ECC UDIMMs already installed in my X8SIT-HF?

No — the board supports either 16 GB of ECC UDIMMs or 32 GB of registered ECC RDIMMs, but the two types cannot be mixed in the same system.

How can I confirm the kit is running at the correct 1333 MHz speed and CL9 timings after installation?

Check the BIOS memory information or a system utility such as CPU-Z; it should report DDR3-1333 (PC3-10600) with 9-9-9 timings at 1.5 V.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.