SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501016BTC
재고 있음
Computer Memory Solutions
Computer Memory Solutions 16GB (4x4GB) DDR3 1333 ECC Registered DIMM Kit B128
16 GB kit of four 4 GB DDR3 1333 ECC registered DIMMs for Supermicro X8 series motherboards
- Capacity16GB (4 x 4GB)
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Timing9-9-9
- Voltage1.5V
- 16 GB kit expands server capacity to the board limit
- ECC registered design protects data integrity in critical workloads
- DDR3-1333 CL9 timing matches Supermicro X8 specifications
- 240-pin DIMM form factor fits the six registered slots
- 5 V operation aligns with platform voltage requirements
Server-grade ECC registered kit
This 16 GB kit contains four 4 GB DDR3 registered DIMMs that run at 1333 MHz with CL9 timing and 1.5 V operation. Each module is dual-rank 2Rx4 and includes ECC for data-integrity protection in server workloads.
Suited for Supermicro X8 platforms
The memory is validated for Supermicro X8Sit-Hf, X8Siu-F and X8Sia-F motherboards that accept registered ECC DIMMs. Systems requiring unbuffered ECC UDIMMs, non-ECC modules or higher-speed DDR3 will not be compatible with this kit.
Capacity ceiling and headroom
The four-module kit populates four of the six available DIMM slots and delivers 16 GB total, leaving two slots free for expansion. The platform supports up to 32 GB of registered ECC memory, so the kit provides half the maximum registered capacity.
주요 특징
- 16 GB kit expands server capacity to the board limit
- ECC registered design protects data integrity in critical workloads
- DDR3-1333 CL9 timing matches Supermicro X8 specifications
- 240-pin DIMM form factor fits the six registered slots
- 5 V operation aligns with platform voltage requirements
사양
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM5127210600ECCR2R4H |
| Capacity | 16GB (4 x 4GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Timing | 9-9-9 |
| Voltage | 1.5V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Heat Spreader | Based on Current Inventory (If Required Please Contact) |
| Compatible System | Supermicro X8Sit-Hf, X8Siu-F, X8Sia-F Motherboard |
| Package Content | 4 Memory RAM Sticks |
이 상품에 대한 질문
Does my Supermicro motherboard need to support registered ECC DDR3 memory for this kit to work?
Yes — the modules are 240-pin DDR3 1333 registered ECC DIMMs, so the board must accept registered ECC memory at that speed.
Can I mix these registered DIMMs with the unbuffered ECC UDIMMs already installed in my X8SIT-HF?
No — the board supports either 16 GB of ECC UDIMMs or 32 GB of registered ECC RDIMMs, but the two types cannot be mixed in the same system.
How can I confirm the kit is running at the correct 1333 MHz speed and CL9 timings after installation?
Check the BIOS memory information or a system utility such as CPU-Z; it should report DDR3-1333 (PC3-10600) with 9-9-9 timings at 1.5 V.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
