نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

Computer Memory Solutions

Computer Memory Solutions 4GB DDR4 2666MHz CL19 SODIMM memory upgrade D38

SKU CH-JSD7-YFPPG

4GB DDR4 SODIMM module running at 2666MHz with CL19 latency, validated for Dell OptiPlex 3060 Micro, 5060 Micro, 5260 All-in-One and 7060 Micro systems

  • Capacity4GB
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Timing19-19-19
  • Voltage1.2V
  • 4GB DDR4 SODIMM expands Dell OptiPlex Micro and All-in-One capacity
  • 2666MHz speed with CL19 timing delivers responsive system performance
  • 2V low-voltage operation reduces power draw in compact desktops
  • 260-pin unbuffered non-ECC design fits supported OptiPlex 3060, 5060, 5260 and 7060 models
  • Single 4GB module allows flexible upgrade up to 32GB maximum memory

Targeted Dell OptiPlex upgrade

This 4 GB DDR4 SODIMM is built for Dell OptiPlex 3060 Micro, 5060 Micro, 5260 All-in-One and 7060 Micro systems. It installs in a single 260-pin slot and runs at 1.2 V without ECC or buffering. The module suits owners who need a straightforward capacity increase on these specific platforms.

Steady throughput with CL19 timing

Rated at 2666 MHz (PC4-21300) with 19-19-19 latency, the stick delivers consistent bandwidth during extended workloads rather than only in brief bursts. Unbuffered, single-rank organisation keeps signal paths short, helping maintain stable operation when the system runs memory-intensive tasks for long periods.

DDR4 SO-DIMM ceiling at 32 GB total

The supported OptiPlex models accept a maximum of 32 GB across two sockets, so this 4 GB module leaves room for one more stick. Builders who need more than 32 GB or who require ECC or registered memory must choose a different platform, as the DDR4 SO-DIMM interface here does not support those configurations.

أبرز المميزات

  • 4GB DDR4 SODIMM expands Dell OptiPlex Micro and All-in-One capacity
  • 2666MHz speed with CL19 timing delivers responsive system performance
  • 2V low-voltage operation reduces power draw in compact desktops
  • 260-pin unbuffered non-ECC design fits supported OptiPlex 3060, 5060, 5260 and 7060 models
  • Single 4GB module allows flexible upgrade up to 32GB maximum memory

المواصفات

BrandComputer Memory Solutions
ModelCM512642666SO
Capacity4GB
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Timing19-19-19
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemDell OptiPlex 3060 Micro, OptiPlex 5060 Micro, OptiPlex 5260 All-in-One, OptiPlex 7060 Micro
Package Content1Memory Ram Stick

أسئلة حول هذا المنتج

How much power does the 1.2 V DDR4 2666 MHz SODIMM draw when the OptiPlex 7060 Micro runs continuously?

At the standard 1.2 V the module draws very little power, so heat and fan noise stay low even during all-day operation in the Micro chassis.

Which slot type must the Dell OptiPlex 5060 Micro already have for this 260-pin stick to fit?

The system needs a DDR4 SO-DIMM slot; the 260-pin keying matches the OptiPlex 5060 Micro memory socket exactly.

Can the 4 GB CL19 module be paired with the factory memory to reach the 32 GB two-socket limit of the OptiPlex 5260 All-in-One?

Yes, the stick is unbuffered non-ECC DDR4 2666 MHz, matching the platform specs, so it works alongside the original module up to the 32 GB maximum.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.