暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board SODIMM module with black memory chips and gold contacts

Computer Memory Solutions

Computer Memory Solutions 4GB DDR4 2666MHz CL19 SODIMM memory upgrade D38

SKU CH-JSD7-YFPPG

4GB DDR4 SODIMM module running at 2666MHz with CL19 latency, validated for Dell OptiPlex 3060 Micro, 5060 Micro, 5260 All-in-One and 7060 Micro systems

  • Capacity4GB
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Timing19-19-19
  • Voltage1.2V
  • 4GB DDR4 SODIMM expands Dell OptiPlex Micro and All-in-One capacity
  • 2666MHz speed with CL19 timing delivers responsive system performance
  • 2V low-voltage operation reduces power draw in compact desktops
  • 260-pin unbuffered non-ECC design fits supported OptiPlex 3060, 5060, 5260 and 7060 models
  • Single 4GB module allows flexible upgrade up to 32GB maximum memory

Targeted Dell OptiPlex upgrade

This 4 GB DDR4 SODIMM is built for Dell OptiPlex 3060 Micro, 5060 Micro, 5260 All-in-One and 7060 Micro systems. It installs in a single 260-pin slot and runs at 1.2 V without ECC or buffering. The module suits owners who need a straightforward capacity increase on these specific platforms.

Steady throughput with CL19 timing

Rated at 2666 MHz (PC4-21300) with 19-19-19 latency, the stick delivers consistent bandwidth during extended workloads rather than only in brief bursts. Unbuffered, single-rank organisation keeps signal paths short, helping maintain stable operation when the system runs memory-intensive tasks for long periods.

DDR4 SO-DIMM ceiling at 32 GB total

The supported OptiPlex models accept a maximum of 32 GB across two sockets, so this 4 GB module leaves room for one more stick. Builders who need more than 32 GB or who require ECC or registered memory must choose a different platform, as the DDR4 SO-DIMM interface here does not support those configurations.

特長

  • 4GB DDR4 SODIMM expands Dell OptiPlex Micro and All-in-One capacity
  • 2666MHz speed with CL19 timing delivers responsive system performance
  • 2V low-voltage operation reduces power draw in compact desktops
  • 260-pin unbuffered non-ECC design fits supported OptiPlex 3060, 5060, 5260 and 7060 models
  • Single 4GB module allows flexible upgrade up to 32GB maximum memory

仕様

BrandComputer Memory Solutions
ModelCM512642666SO
Capacity4GB
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Timing19-19-19
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemDell OptiPlex 3060 Micro, OptiPlex 5060 Micro, OptiPlex 5260 All-in-One, OptiPlex 7060 Micro
Package Content1Memory Ram Stick

この商品に関する質問

How much power does the 1.2 V DDR4 2666 MHz SODIMM draw when the OptiPlex 7060 Micro runs continuously?

At the standard 1.2 V the module draws very little power, so heat and fan noise stay low even during all-day operation in the Micro chassis.

Which slot type must the Dell OptiPlex 5060 Micro already have for this 260-pin stick to fit?

The system needs a DDR4 SO-DIMM slot; the 260-pin keying matches the OptiPlex 5060 Micro memory socket exactly.

Can the 4 GB CL19 module be paired with the factory memory to reach the 32 GB two-socket limit of the OptiPlex 5260 All-in-One?

Yes, the stick is unbuffered non-ECC DDR4 2666 MHz, matching the platform specs, so it works alongside the original module up to the 32 GB maximum.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。